Machining table

Zero joint edge bander HIT-M 65 SA

Zero joint edge bander HIT-M

ref.no.: 9K0002

MAX + Case
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Nominal voltage 230 V
Nominal power input 4.1 hp
Edge height 3/8 - 2 9/16 Inch
Tilt range 0 - 50 °
Edge thickness ¹/64 - ¹/8 Inch
Heating time
Temperature max. 968 ° F
Infinitely variable feed rate 3.3 - 18.0 ft/min
Dimensions (L x W x H) 8 11/16 x 6 5/16 x 14 ³/16 Inch
Connection compressed air
Min. inside radius 3/8 Inch
Weight 23.8 lbs
1 swivelling driven roller
1 Tanos systainer size 5
1 swivelling support plate
1 cleaning brush
1 hexagon socket 3 mm (¹/8 in)
1 hexagon socket 4 mm (3/16 in)
1 hexagon socket 5 mm (3/16 in)
1 hexagon socket 6 mm (1/4 in)
1 connection package 5 m (16,4 ft) (voltage/compressed air)
undefined All commercially available edges from 0.4 - 3 mm (¹/64 - ¹/8 in) with pre-coated or post-coated functional layer can be processed with the HIT-M.
undefined For bevelled plate edges, the support plate can be swivelled up to 50°.
undefined Especially due to the driven pressure roller of the SA-model, extreme inner radii as from 10 mm can be effortlessly implemented.
undefined A clear arrangement of the control elements makes working with the device simple and intuitive.
  • Optimally suited for larger moulded parts, for example, and for use on the construction site.
  • For panel materials with edge heights of up to 65 mm
  • For bevelled plate edges, the support plate can be swivelled up to 50°.
  • Automatic edge feed with edge detection as stop function.
  • A clear arrangement of the control elements makes working with the device simple and intuitive.
  • Connection socket for optionally available foot switch.
  • The HIT-M is the first and only mobile device for creating an optical zero joint. With the hot air injection technique, all customary zero joint edges with applied functional layer can be processed - without the use of additional adhesive.
  • The HIT-M can be flexibly used and is ideal for intricate components. Especially with free-forms or tight radii it shows its great strengths.
  • Perfectly straight, bevelled, curved and round panel materials as well as moulded parts can be processed. Inclined cut surfaces of up to 55° can be easily achieved.
  • The working temperature is reached a few seconds after switching on the unit. With the HIT-M there is no need for time-consuming colour changes or cleaning of glue pans.
Image Description Ref. No.
undefined Machining table BAT+
Machining table BAT
9K0101
undefined Machining table BAT
Machining table BAT
9K0102
undefined Foot switch
momentary/latching
208469
undefined Hold-down device
with roller for guiding workpieces on the BAT
208470
undefined Vacuum plate D 160
for machining table BAT
208471
undefined Vacuum plate
for machining table BAT, 200 x 55 mm
208472
undefined Vacuum plate
for machining table BAT, 255 x 55 mm
208473
Image Description Ref. No.
undefined Vacuum plate
for machining table BAT, 370 x 80 mm
208474
undefined Table extension
for machining table BAT, each 600 x 490 mm
208475
undefined Plastic ball casters
for machining table BAT, 10 pieces
208477
undefined Strip magazine holder
for machining table BAT
208479
undefined Strip magazine
for machining table BAT,
208956
undefined Shims
for machining table BAT, 0.8mm, set
208476
undefined Main picture
jpg, 1417 × 1417 Pixel,
378.1 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
262.7 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
344.6 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
240.7 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
306.5 kB