Milling templates

Milling templates Arunda 80N Maxi

Milling templates

ref.no.: 91A707

Fast tool change
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Tenon on timber width 3 1/8 - 5 1/2 Inch
Timber height 3 1/2 - 13 Inch
Timber section 3 1/8 x 3 1/2 - 5 1/2 x 13 Inch
1 pair of jigs
1 burr milling cutter
1 expensions plate Ref. No. 093782
1 positioning gauge
2 pairs of blades
1 wooden box
undefined Dovetailed joints on floor joists or rafter (roof system).
undefined Perpendicular or angled joints on floor joists or rafter (roof system).
undefined Speed: 8 to 18 mortise/tenon joints per hour.
undefined The Arunda system is delivered in a practical wooden box.
  • dovetailed wood-to-wood joints
  • Perpendicular or angled joints on floor joists or rafter (roof system).
  • Just as easy to use in the work-shop as on the job site.
  • Push-down dovetail assembly is very fast and easy. No need to pull apart the load-bearing beams to insert tenons.
  • Double-cone self-tightening joints.
  • Identical router bit setting to cut both mortise and tenon.
  • Arunda is a system for manually making dovetailed wood-to-wood joints to assemble timber frame structures.
  • All you need is a pair of Arunda jigs (one for the tenon and the other for the mortise),a powerful Mafell router LO 65 Ec equipped with the special Arunda cutter and some accessories.
  • There are several models available but only one size will be selected to fit your most commonly used timber widths. Keep in mind: The bigger the joint, the greater and better its resistance!
undefined Main picture
jpg, 1417 × 1417 Pixel,
639.2 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
444.6 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
251.6 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
543.1 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
196.1 kB