Milling templates

Arunda 50B Maxi

Arunda® System - Class B 91A701

Fast tool change
Technical data
Delivery specification
Examples for usage
Accessories / Tools
Media centre
Tenon on timber width 1 3/4 - 4 Inch
Timber height 3 1/2 - 13 Inch
Timber section 1 3/4 x 3 1/2 - 4 x 13 Inch
1 pair of jigs
1 burr milling cutter
1 guide ring
1 expensions plate Ref. No. 093782
1 positioning gauge
2 pairs of blades
1 wooden box
  • Perpendicular or angled joints on floor joists or rafter (roof system).
  • Just as easy to use in the work-shop as on the job site.
  • Push-down dovetail assembly is very fast and easy. No need to pull apart the load-bearing beams to insert tenons.
  • Double-cone self-tightening joints.
  • Identical router bit setting to cut both mortise and tenon.
  • Arunda® is a system for manually making dovetailed wood-to-wood joints to assemble timber frame structures.
  • All you need is a pair of Arunda® jigs (one for the tenon and the other for the mortise),a powerful Mafell router LO 65 Ec equipped with the special Arunda® cutter and some accessories.
  • There are several models available but only one size will be selected to fit your most commonly used timber widths. Keep in mind: The bigger the joint, the greater and better its resistance!
undefined Main picture
jpg, 1417 × 1417 Pixel,
547.1 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
444.6 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
228.3 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
543.1 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
196.1 kB