Insulation saw

Plunge-Cut Saw MT 55 cc MaxiMAX in T-MAX - GB 230 V

Plunge-Cut Saw MT 55 cc

ref.no.: 917633

  • position indicator MT-PA included in delivery scope
  • parallel guide fence included in delivery scope
  • Transport and storage box T-MAX
230 V Cuprex Variable speed Suction Guide system Variable depth Tilt angle 45° Fast tool change Safety brake MAX + Case
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 0 - 2 1/4 Inch
Cutting depth at 45° 0 - 1 5/8 Inch
Tilt range -1 - +48 °
Nominal No. of strokes – no load 3600-6250 1/min
Nominal power input 1.9 hp
Universal motor 230 V / 50 Hz
Weight 9.9 lbs
1 Allen key 5 mm Ref. No. 093034
1 TCT sawblade 162 x 1.2/1.8 x 20 mm, 48 alternating teeth, for universal use with board materials Ref. no. 092584
1 Position indicator MT-PA Ref. No. 205398
1 Parallel guide fence Ref. No. 203214
1 Mains cable 4 m - GB 230 V Ref. No. 087802
undefined MAFELL offers the fastest blade change worldwide. Simply press release button and lift lever. Housing opens and allows you to change the blade in a matter of seconds, without any risk of damaging the teeth.
undefined The saw is easy to use on other track systems as well.
undefined With or without rail – simply turn the pointer to show the exact cutting depth.
undefined The MT 55 cc comes into its own, for example, when executing high-precision plunge cuts in kitchen worktops.
  • Cross-cutting and rip cuts
  • Bevel cuts -1 to +48°
  • Plunge cuts
  • Compatible materials include solid wood, cement fiberboard, melamine resin panels (Trespa), OSB, gypsum fiberboard, plastics, façade boards and various board materials
  • Facility for extremely fine adjustment of the cutting depth setting, e.g. when working with a resharpened blade or with Fermacell.
  • The closed saw blade cover and the slide bar at the saw-cut ensure a very low dust formation.
  • The MT 55 cc is equipped with a new CUprex-Compact motor for significantly elevated speeds and ample power in reserve.
  • The cutting depth can be set with millimeter precision. With or without a rail – simply turn the pointer to show the exact cutting depth.
  • For bevel cuts, the angle setting is fixed in two locations with half a turn of a single locking screw.
  • The idea of developing a new plunge-cut saw is not new in itself. The novel aspect of this development, however, was the origination of a unique precision product from a set of especially designed machine components.
  • The plunge-cut saw MT 55 cc is a jack of all trades. It can execute plunge, parting, bevel and angled cuts with supreme precision and without any tearing.
  • The scoring function is quickly activated in a single movement. The MT 55 cc then cuts visible edges as cleanly as a stationary machine, even if the splinter guard is worn.
  • Continuously variable speed for a variety of materials and sawblades.
  • The cutting depth range has now been extended to 57 mm (2 1/4 in.). Thanks to the innovative tilting system, the options afforded for bevel cuts are practically unlimited as well.
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long
204380
undefined Guide rail F 110
1.1 m (3.6 ft) long
204381
undefined Guide rail F 160
1.6 m (5.2 ft) long
204365
undefined Guide rail F 210
2,1 m (6,9 ft) long
204382
undefined Guide rail F 310
3,1 m (10,2 ft) long
204383
undefined Connecting piece F-VS
for joining two guide rails
204363
undefined Angle fence F-WA 205357
undefined Suction clamping system Aeroxfix F-AF 1
with 1,3 m rail, adapters for above and underneath rail, flexible hose
204770
undefined Flexible hose FXS-L
up to 3,2 m (10.6 ft) long
205276
undefined Guide pocket F 160
for guide rails up to 1,6 m
204626
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket
204805
undefined Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket
204749
undefined End cap F-EK
2 pieces
205400
undefined Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long
204376
Image Description Ref. No.
undefined Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long
204375
undefined Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece
207770
undefined Position indicator MT-PA 205398
undefined Guide fence, cpl. 202867
undefined Parallel guide fence
with wing screws
203214
undefined Roller edge guide MF-UA 206073
undefined TCT saw blade
162 x 1.2/1.8 x 20 mm (6 3/8 in.), AT, 48 teeth, for universal use with board materials
092584
undefined TCT saw blade
160 x 1,2/1,8 x 20 mm (6 5/16 in.), AT, 24 teeth, for universal use in wood
092533
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.), AT, 16 teeth, for rip cuts in wood
092539
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood
092552
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.) / FT/TT, 56 teeth, for fine sawing
092553
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm, (6 5/16 in.). FT/TT, 48 teeth (for Trespa)
092569
undefined Saw blade Dia
160 x 2.4/3.0 x 20 mm (6 5/16 in.) / 4 flat/trapezoidal teeth for cement-bonded materials
092474
undefined Dust bag 206921
undefined Main picture
jpg, 1417 × 1417 Pixel,
80.3 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
844.3 kB
undefined Images in use 2
jpg, 1408 × 1056 Pixel,
89.8 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
530.8 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
812.1 kB