Plunge Cut Saw

Portable Circular Saw K 85 Ec in L-Max - USA 120 V

Portable Circular Saw K 85 Ec in L-Max

ref.no.: 918233

  • With CUprex, the high-performance motor
  • Electronic control
  • in MAFELL L-MAX case
Suction Cuprex Variable speed Plunge cut function Guide system Variable depth Tilt angle 60° Lightweight Fast tool change Safety brake
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 0 - 3 7/16 Inch
Cutting depth at 45° 0 - 2 7/16 Inch
Cutting depth at 60° 1/16 - 1 3/4 Inch
Tilt range 0 - 60 °
Weight 14.8 lbs
Universal motor 120 V / 60 Hz
Nominal power input 2.4 hp
Nominal No. of strokes – no load 1/min
1 TCT saw blade 237 x 1.8/2.5 x 30 mm (9 5 /16 in.), AT, 12 teeth, for rip cuts in wood Ref. No. 092590
1 Parallel guide fence Ref. 205323
1 Hose connector for chip extraction Ref. No. 205290
1 Allen key 5 mm Ref. No. 093034
1 Mains cable 4 m - GB 110 V Ref. No. 087803
undefined Thanks to the unique tilting system, the sawblade always cuts directly along the rubber lip, irrespective of the angle setting.
undefined Working close to the edge is facilitated by the K 85-UA roller edge guide. Use the scale marked on the arm to set the spacing.
undefined By retracting blade alongside the second handle, offering up the machine is easy and safe, especially when executing bevel cuts.
undefined The sawblade and pivoting guard can be locked with a single action. This practical solution engages the starting lockout at the same time.
  • Cross-cutting and rip cuts
  • Bevel / compound miter cuts up to 60°
  • Birdsmouth cuts
  • Plunge cuts
  • Chamfers and grooves
  • Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials
  • The K 85 / K 85 Ec offers an enhanced cutting depth of up to 88 mm (3 7/16 in.). Even when used in conjunction with the guide rail, it achieves an exceptional depth of 82 mm (3 3/16 in.).
  • Optimum chip ejection, especially when sawing insulating materials.
  • Sawing to mark. The pointer adjusts automatically to the set tilt angle.
  • The cutting depth is set and locked in a single, quick action.
  • Thanks to the new tilting arrangement of the K 85 / K 85 Ec, reading the scale is easier than ever before.
  • The MAFELL portable circular saw combines power and precision with ease of use and ergonomic design. These properties transform the machine into a unique system.
  • Sheer power and high torque take on a whole new meaning with the new high-output CUprex motor. It offers performance-optimized digital electronics and newly developed control technology. Its speed is continuously variable according to the nature of the material and application.
  • It is no longer necessary to unscrew the riving knife – the FLIPPKEIL offers you optimum user-friendliness and safety when plunge cutting.
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long
204380
undefined Guide rail F 110
1.1 m (3.6 ft) long
204381
undefined Guide rail F 160
1.6 m (5.2 ft) long
204365
undefined Guide rail F 210
2,1 m (6,9 ft) long
204382
undefined Guide rail F 310
3,1 m (10,2 ft) long
204383
undefined Connecting piece F-VS
for joining two guide rails
204363
undefined Angle fence F-WA 205357
undefined Suction clamping system Aeroxfix F-AF 1
with 1,3 m rail, adapters for above and underneath rail, flexible hose
204770
undefined Flexible hose FXS-L
up to 3,2 m (10.6 ft) long
205276
undefined Guide pocket F 160
for guide rails up to 1,6 m
204626
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket
204805
undefined Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket
204749
Image Description Ref. No.
undefined End cap F-EK
2 pieces
205400
undefined Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long
204376
undefined Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long
204375
undefined Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece
207770
undefined Guide track L
max. cutting length 370 mm (14 9/16 in.)
208171
undefined Parallel guide fence 205323
undefined Roller edge guide
K 85-UA
205166
undefined L-MAX
with insert
095170
undefined TCT saw blade
237 x 1,8/2,5 x 30 mm (9 5/16 in.), AT, 24 teeth, for rip cuts and cross-cutting in wood
092591
undefined TCT saw blade
237 x 1.8/2.5 x 30 mm (9 5/16 in.), AT, 12 teeth for rip cuts in wood
092590
undefined TCT saw blade
237 x 1.8/2.5 x 30 mm (9 5/16 in.), AT, 56 teeth for cross-cutting in wood
092592
undefined Main picture
jpg, 1417 × 1417 Pixel,
330.6 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
332.7 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
289.5 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
337.1 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
310.6 kB