Plunge Cut Saw

Plunge Cut Saw KST 55 S MidiMAX in the MAFELL-MAX - GB 110 V with guide track 1,6 m

ref.no.: 916167

  • Attention: Just spare parts are still available
Technical data
Examples for usage
Accessories / Tools
Media centre
Cutting depth 0 - 2 3/16 Inch
Cutting depth at 45° 0 - 1 9/16 Inch
Tilt range -1 - 48 °
Nominal No. of strokes – no load 5200 1/min
Nominal power input 1.5 hp
Weight 1.8 lbs
Universal motor 110 V
undefined Clean plunge cuts without detaching the riving knife, thanks to the MAFELL-FLIPPKEIL.
undefined The enclosed design is further optimized by the transparent slide that can be lowered to the work surface.
undefined The guard comes down together with the blade to ensure optimal dust extraction.
undefined Saw unit can be set to scoring for tear-free cuts. Due to the scoring cut the cutting edge is shifted slightly.
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long
204380
undefined Guide rail F 110
1.1 m (3.6 ft) long
204381
undefined Guide rail F 160
1.6 m (5.2 ft) long
204365
undefined Guide rail F 210
2,1 m (6,9 ft) long
204382
undefined Guide rail F 310
3,1 m (10,2 ft) long
204383
undefined Angle fence F-WA 205357
undefined Connecting piece F-VS
for joining two guide rails
204363
undefined Guide pocket F 160
for guide rails up to 1,6 m
204626
Image Description Ref. No.
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket
204805
undefined Parallel guide fence
with wing screws
203214
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.), AT, 16 teeth, for rip cuts in wood
092539
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood
092552
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.) / FT/TT, 56 teeth, for fine sawing
092553
undefined TCT saw blade
160 x 1.2/1.8 x 20 mm, (6 5/16 in.). FT/TT, 48 teeth (for Trespa)
092569
undefined DIA saw blade-set
160 x 2.4/3.0 x 20 mm (6 5/16 in.), 4 teeth, for cement-bonded materials, including riving knife
203640
undefined Saw blade Dia
160 x 2.4/3.0 x 20 mm (6 5/16 in.) / 4 flat/trapezoidal teeth for cement-bonded materials
092474
undefined Main picture
jpg, 1122 × 1122 Pixel,
89.2 kB
undefined Images in use 1
jpg, 529 × 529 Pixel,
53.6 kB
undefined Images in use 2
jpg, 1848 × 1848 Pixel,
268.1 kB
undefined Images in use 3
jpg, 529 × 529 Pixel,
85.6 kB
undefined Images in use 4
jpg, 579 × 579 Pixel,
77.7 kB