Oscillating Jig Saws

Portable Circular Carpentry Saw MKS 145 Ec

Portable Circular Carpentry Saw MKS 145 Ec

ref.no.: 924701

  • boxed
Cuprex Suction Safety brake Variable depth Lightweight Tilt angle 60° Guide system Fast tool change Variable speed 230 V
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 2 9/16 - 5 11/16 Inch
Cutting depth at 45° 1 13/16 - 4 1/16 Inch
Cutting depth at 60° 1 1/4 - 2 7/8 Inch
Tilt range 0 - 60 °
Nominal No. of strokes – no load 1900 - 2300 1/min
Nominal power input 3.5 hp
Weight 30.4 lbs
Universal motor 230 V / 50 Hz
1 Allen key 6 mm Ref. No. 093081
1 Parallel guide fence
1 TCT saw blade 370 x 2.2/4.2 x 30 mm (14 9/16 in.), AT, 26 teeth (MKS 145 Ec) Ref. No. 092526
1 Mains cable 10 m (32.8 ft) Ref. No. 087612
undefined Top results, as shown here with the MKS 165 Ec, can only be achieved with original MAFELL tools.
undefined The cutting depth can be adjusted easily via a precise handwheel.
undefined The tilt range of 0° – 60° enables extreme bevel cuts.
undefined The constant cut display.
  • Cross-cutting and rip cuts
  • Bevel cuts up to 60°
  • General joining work
  • Compatible materials include solid wood, laminated beams, insulating materials
  • Continuously variable speed control for individual requirements and applications.
  • Lower saw guard with remote control - for easy release of the saw blade, e.g. when positioning at sharp angles.
  • Constant cut display for 0° - 60° - due to exact centre of rotation, which is on the unterside of the base plate.
  • With tool brake - for optimum operator safety and work processes.
  • Carpenter´s portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys.
  • Tilt through 60° makes the portable circular saws a universal partner.
  • An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement.
  • The saw´s handling and behavior are refined by smooth starting, constant speeds under load, speed reduction and overload protection.
  • The easy-to-use stop system of the MKS and the adjustable hose connector make your work much easier.
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long
204380
undefined Guide rail F 110
1.1 m (3.6 ft) long
204381
undefined Guide rail F 160
1.6 m (5.2 ft) long
204365
undefined Guide rail F 210
2,1 m (6,9 ft) long
204382
undefined Guide rail F 310
3,1 m (10,2 ft) long
204383
undefined Connecting piece F-VS
for joining two guide rails
204363
undefined Angle fence F-WA 205357
undefined Guide pocket F 160
for guide rails up to 1,6 m
204626
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket
204805
undefined Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket
204749
Image Description Ref. No.
undefined End cap F-EK
2 pieces
205400
undefined Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long
204376
undefined Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long
204375
undefined Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece
207770
undefined Guide rail
length 3 m (9.8 ft) (2 pieces with connecting piece)
037037
undefined Guide rail
length 3 m (9.8 ft) (one piece)
200672
undefined Guide rail extension
length 1,5 m (4.9 ft)
036553
undefined Adapters (pair)
for parallel guide fence
037195
undefined TCT saw blade
370 x 2.2/4.2 x 30 mm (14 9/16 in.), AT, 18 teeth, for ripping cuts (MKS 145 Ec)
092524
undefined TCT saw blade
370 x 2.2/4.2 x 30 mm (14 9/16 in.), AT, 26 teeth, for universal use (MKS 145 Ec)
092526
undefined Main picture
jpg, 1417 × 1417 Pixel,
449.6 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
303.0 kB
undefined Images in use 2
jpg, 579 × 579 Pixel,
136.6 kB
undefined Images in use 3
jpg, 579 × 579 Pixel,
81.9 kB
undefined Images in use 4
jpg, 579 × 579 Pixel,
110.7 kB