Oscillating Jig Saws

Jig Saw P1 cc MaxiMAX case in the T-MAX - GB 230 V

Jig Saw P1 cc

ref.no.: 917121

  • Transport and storage box T-MAX
Guide system 230 V Variable depth Suction Cuprex Variable speed MAX + Case Tilt angle 45° Oscillating stroke Fast tool change
Technical data
Delivery specification
Examples for usage
Accessories / Tools
Media centre
Nominal power input 1.2 hp
Universal motor 230 V / 50 Hz
No-load number of strokes 800-3000 1/min
Weight 5.5 lbs
Stroke height 1 Inch
3 jig saw blades CUnex W1, W2, W+P2
1 Parallel guide fence P1-PA Ref. No. 205448
1 base plate P1-GP Ref. No. 204350
1 hose connector P1-AS Ref. No. 203917
1 chip deflector P1-SA Ref. No. 204353
1 splinter guard P1-SS Ref. No. 205447
1 glider P1-G Ref. No. 205464
1 Mains cable 4 m (13.1 ft)
undefined Innovative CUmax sawblade clamping ensures a positive fit because of a wedge pushing against the blade. This design reliably fastens the sawblade so that it cannot be displaced.
undefined In order not to compromise the strength of the standard sole plate, a separate tilting plate was developed for the P1 cc.
undefined The CUnex W1 consists of two separate, soldered sawblades. The blade‘s strength and wedge shape ensure precise and square sawing, even when cutting curves.
undefined If exactly straight cuts are required, the P1 cc can be used in conjunction with the MAFELL F guide rail.
  • Straight cuts with guide rail and CUnex
  • Guided circle cutting with P1-PA parallel fence and CUnex
  • Recesses
  • Bevel cuts up to 45°
  • Compatible materials depend on sawblade; see special accessories/tools
  • The iF Product Design Award 2011 for the Jig Saw P1 cc.
  • To change the sawblade, simply release the locking lever. With just one hand, effortlessly remove the blade and insert the replacement.
  • The high-performance CUprex compact motor delivers consistently high speeds, even when executing long cuts.
  • The vacuum channel integrated in the sole plate guarantees outstanding dust extraction directly alongside the sawblade.
  • Owing to its ergonomic design, with low center of pressure and soft pads, the P1 cc is comfortable to hold in every situation.
  • Sophisticated self-extraction and a clever integrated blower keep the work surface free from chips, even if a dust extractor is not connected. The workplace therefore remains clean at all times.
  • The P1 cc offers continuously variable speeds in the range 800 to 3000 strokes/min., so that the output can be adjusted exactly to suit the material.
  • The sole plate, with integrated vacuum channel, is as sturdy as it looks. By way of a quick-release mechanism, it remains reliably fastened to the saw at an exact right angle.
  • Its intelligent accessories give the P1 cc unprecedented versatility. The innovative design of the new MAFELL precision sawblade CUnex W1, in particular, facilitates extremely precise sawing.
Image Description Ref. No.
undefined Jig saw blade CUnex W1
2 pieces
undefined Jig saw blade W2
5 pieces
undefined Jig saw blade W3
5 pieces
undefined Jig saw blade W4
5 pieces
undefined Jig saw blade W5
5 pieces
undefined Jig saw blade W6
5 pieces
undefined Jig saw blade W+P2
5 pieces
undefined Jig saw blade W+M2
5 pieces
undefined Jig saw blade L2
5 pieces
undefined Jig saw blade M2
5 pieces
undefined Jig saw blade E+F2
1 piece
undefined Assortment 1
4 x W2, W+P2, W5, W4, 2 x CUnex W1
undefined Assortment 2
4 x M2, W6, L2, W+M2, 2 x CUnex W1
undefined Paralle guidel fence P1-PA
incl. circular cutter
undefined Tilting plate P1-SP
tilting range +/- 45°
undefined Splinter guard P1-SS
5 pieces
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long
undefined Guide rail F 110
1.1 m (3.6 ft) long
undefined Guide rail F 160
1.6 m (5.2 ft) long
undefined Guide rail F 210
2,1 m (6,9 ft) long
undefined Guide rail F 310
3,1 m (10,2 ft) long
undefined Connecting piece F-VS
for joining two guide rails
undefined Angle fence F-WA 205357
undefined Guide pocket F 160
for guide rails up to 1,6 m
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket
undefined Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket
undefined End cap F-EK
2 pieces
undefined Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long
undefined Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long
undefined Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece
undefined Flexible hose FXS-L
up to 3,2 m (10.6 ft) long
undefined Main picture
png, 2022 × 1777 Pixel,
1.8 MB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
543.8 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
861.2 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
753.5 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
860.4 kB