Hand Router

Hand Router LO 50 E in the MAFELL-MAX

Hand Router

ref.no.: 913302

  • Attention: Just spare parts are still available
230 V Suction Variable depth MAX + Case Guide system Lightweight Full wave electronics Variable speed Fast tool change
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 0 - 1 15/16 Inch
Tool fastening (Standard collet chuck) 5/16 Inch
Speed - electronically stabilised 10000 - 22000 1/min
Nominal power input 1.3 hp
Weight 6.0 lbs
Universal motor 230 V / 50 Hz
1 Parallel guide fence with fine adjustment
1 Template guide 20 mm (13/16 in.) Ref. No. 200693
1 Collet Ø 8 mm Ref. No. 076441
1 Chip collector Ref. No. 038986
1 Single-end spanner 19 mm Ref. No. 093011
1 Mains cable 4 m (13.1 ft) Ref. No. 087323
Stylish profiling with the spacer disk cutter.
A clean and tidy combination: the LO 50 E and S 50 M from MAFELL.
Adjusting the cutting depth by means of three-position revolving depth control turret.
undefined The LO 50 E is supplied in the practical MAFELL-MAX case.
  • Compatible materials include solid wood and board materials, for lettering, ornamental and decorative work, shaping, cutting grooves and rebating
  • Ergonomic pistol handle – for optimum operation.
  • Fine adjustment for cutting depth and lateral stop plate.
  • Individual setting of speed, cutting depth and guide – for a wide variety of applications.
  • The control electronics keep the pre-set speed constant and guarantee smooth start-up.
  • The ``freehand´´ router for individual use. Whether you use it for lettering, ornaments or decorations or „only“ for chamfering, mortising, cutting grooves or rebating - with the LO 50 E it´s all within your grasp!
  • The LO 50 E is equipped with a 50 mm (1 15/16 in.) cutting depth and a speed of 10.000 to 22.000 rpm.
  • The pistol handle is ideal for keeping the machine „on track“ even for the most difficult cutting work.
  • The groove in the base plate permits flush trimming of edge bands without any additional attachments.
  • To replace the cutter quickly and easily, simply turn the LO 50 E upside down. A standard spindle locking mechanism is fitted as a matter of course.
Image Description Ref. No.
undefined Router guide device
Attention: Just spare parts are still available
200500
undefined Guide track
1 m (3.3 ft) long, with adapter
200690
undefined Screw clamp
for guide track
093249
undefined Fence with straight angle
Attention: Just spare parts are still available
038108
undefined Collet
6 mm
093270
undefined Collet
8 mm
076441
undefined Collet
1/4"
093271
Image Description Ref. No.
undefined Template guide
Ø 10,8 mm (7/16 in.)
200694
undefined Template guide
Ø 13,8 mm (9/16 in.)
200695
undefined Template guide
Ø 20 mm (13/16 in.)
200693
undefined Template guide
Ø 27 mm (1 1/16 in.)
038988
undefined Template guide
Ø 30 mm (1 3/16 in.)
038971
undefined Template guide
Ø 40 mm (1 9/16 in.)
038989
undefined Images in use 4
jpg, 562 × 562 Pixel,
44.4 kB