Hand Router

Hand Router LO 65 Ec MidiMAX in T-MAX

Hand Router

ref.no.: 916950

  • Transport and storage box T-MAX
Suction Variable depth Guide system Full wave electronics Variable speed Fast tool change
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 0 - 2 9/16 Inch
Chuck Ø
Nominal No. of strokes – no load 10000 - 22000 1/min
Nominal power input 3.5 hp
Weight 15.2 lbs
Universal motor 230 V / 50 Hz
1 Template guide Ø 30 mm (1 3/16 in.) Ref. No. 038971
1 Adapter with internal shaft M 12 x 1 Ref. No. 201575
1 Single-end spanner 22 mm Ref. No. 093012
1 Chip collector Ref. No. 204325
1 Mains cable 4 m (13.1 ft) Ref. No. 087885
undefined Adjusting the cutting depth by means of three-position revolving depth control turret.
undefined The LO 65 Ec in daily use.
undefined The output of the digital electronic CUprex motor is continuously variable to suit a wide range of materials and cutter diameters.
  • Profiling and cutting grooves
  • Cutting for fittings/hardware
  • Dovetail joints (Lignatool, Arunda)
  • For routing stair housings
  • Compatible materials include solid wood and board materials
  • Twin-guide parallel fence with fine adjustment – for precise guidance.
  • Individual setting of speed, cutting depth and guide – for a wide variety of applications.
  • Considerable time-saving – due to fast cutting with the CUprex high-powered 2600 watt (3.0 hp) motor.
  • With voltage loss switch for protection against uncontrolled reconnection after a power interruption.
  • Sheer power and high torque take on a whole new meaning with the new high-output CUprex motor. It offers performance-optimized digital electronics and newly developed control technology. Its speed is continuously variable according to the nature of the material and application.
  • The coordinated, optimised components enable the machine to be used for filigree work requiring absolute precision. The fine adjustment of the cutting depth can be fixed exactly, making refinishing an exception.
  • The groove in the base plate permits flush trimming of edge bands without any additional attachments.
  • To replace the cutter quickly and easily, simply turn the LO 65 Ec upside down. A standard spindle locking mechanism is fitted as a matter of course.
Image Description Ref. No.
undefined Screw clamp
for guide track
093249
undefined Roller edge guide 038987
undefined Template guide
Ø 20 mm (13/16 in.)
200693
undefined Template guide
Ø 27 mm (1 1/16 in.)
038988
undefined Template guide
Ø 30 mm (1 3/16 in.)
038971
undefined Template guide
Ø 40 mm (1 9/16 in.)
038989
undefined Collet
6 mm
093257
undefined Collet
8 mm
093256
Image Description Ref. No.
undefined Collet
10 mm
093255
undefined Collet
12 mm
093254
undefined Collet
1/2"
093276
undefined Collet
1/4"
093279
undefined Adapter for router bit
with internal shaft M 10
039363
undefined Adapter for router bit
with internal shaft M 12 x 1
201575
undefined Adapter for hand router LO-FA 207200
undefined Main picture
jpg, 1654 × 1654 Pixel,
770.3 kB
undefined Images in use 1
jpg, 1200 × 1200 Pixel,
207.9 kB