Cross-Cutting System

Cordless Drill Driver A 18 M bl MidiMAX in the T-MAX - GB

Cordless Drill Driver A 18 M bl

ref.no.: 91A021

  • Transport and storage box T-MAX
MAX + Case Clockwise/counter-clockwise Variable speed
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Collar diameter 1 11/16 Inch
Chuck capacity 1/2 Inch
Max. drilling diameter in wood / steel 1 15/16 / 1/2 Inch
Torque soft / hard 44 / 90 Nm
Impulse torque (soft) 49 Nm
1st speed range 0 - 600 1/min
2nd speed range 0 - 2050 1/min
Weight (including battery 3.7 lbs
Nominal voltage 18 V
Torque settings 11
1 Quick-release chuck A-SBF 13 Ref. No. 206772
1 Quick-release bit holder A-SBH Ref. No. 206766
1 Battery-PowerStation APS 18 M Ref. No. 094453
2 Battery PowerTanks 18 M 72 Ref. No. 094432
1 Belt clip
1 Auxiliary handle
1 Bit PZ 2
undefined Swap the bit holder, chuck and angle head in a matter of seconds – it‘s easy with the clever quick-release system. Pull out, insert, ready to go.
undefined Drilling in wood with a 50 mm Lewis auger bit? Not a problem for the A 18 M bl and ASB 18 M bl with auxiliary handle.
undefined The battery permanently displays its exact charge, even when it is detached.
  • Drilling
  • Driving
  • Ideal for construction sites
  • The convenient function switch on the top of the cordless drill driver selects the drilling, driving and impulse modes.
  • The maintenance-free brushless motor ensures a long service life and, thanks to its high efficiency, makes best possible use of the battery capacity.
  • With two bit holders on each side of the machine, the desired bit is always to hand.
  • Spindle with 1/4“ chuck directly accommodates bits and push-fit accessories.
  • 43 mm diameter clamping collar fits all MAFELL BST drilling stations.
  • Bright LEDs illuminate a large working area.
  • Powerful, user-friendly, tough, resilient – MAFELL‘s new, high-output cordless drill drivers enhance the pleasure of doing a good job.
  • The large torque range gives access to extremely high twisting forces. Screws can be tightened carefully in a wide range of applications – with the appropriate torque selected, even large screws can be used.
  • Tool-free quick-release system for speed and efficiency when alternating between drilling and driving.
  • The selectable impulse mode comes to the fore when confronted with immovable screws.
  • Thanks to the practical belt clip, the cordless drill driver is always within reach. It can be attached to the left or right of the machine without any tools.
  • The battery PowerTanks feature process-controlled technology.
  • All the relevant factors, including the individual cell state, air cooling and cell temperature are monitored. In addition, the floating battery cells are protected against mechanical influences.
Image Description Ref. No.
undefined Quick-release chuck A-SBF 13
13 mm (1/2 in.)
206772
undefined Quick-release bit holder A-SBH 206766
undefined Angle head A-WV 18
up to 100 Nm
094459
undefined Torque head A-DMV x3
3:1 ratio
094450
undefined Battery PowerTanks 18 M 72 LiHD
Li-Ion, 18V, 72 Wh (LiHD)
094500
undefined Battery-PowerTank 18 M 99 LiHD
Li-Ion, 18V, 99 Wh (LiHD)
094503
undefined Battery-PowerStation APS 18M - GB
18 V
094454
undefined Battery-PowerStation APS 18M + - GB
High-speed charger 18V
094440
undefined Lewis auger bit with hexagonal shank
Ø 10 mm (3/8 in.), total length 650 mm (25 9/16 in.)
090240
undefined Lewis auger bit with hexagonal shank
Ø 12 mm (1/2 in.), total length 650 mm (25 9/16 in.)
090241
undefined Lewis auger bit with hexagonal shank
Ø 14 mm (9/16 in.), total length 650 mm (25 9/16 in.)
090242
undefined Lewis auger bit with hexagonal shank
Ø 16 mm (5/8 in.), total length 650 mm (25 9/16 in.)
090243
undefined Lewis auger bit with hexagonal shank
Ø 18 mm (11/16 in.), total length 650 mm (25 9/16 in.)
090244
undefined Lewis auger bit with hexagonal shank
Ø 20 mm (13/16 in.), total length 650 mm (25 9/16 in.)
090245
undefined Lewis auger bit with hexagonal shank
Ø 22 mm (7/8 in.), total length 650 mm (25 9/16 in.)
090246
undefined Lewis auger bit with hexagonal shank
Ø 24 mm (15/16 in.), total length 650 mm (25 9/16 in.)
090247
undefined Lewis auger bit with hexagonal shank
Ø 26 mm (1 in.), total length 650 mm (25 9/16 in.)
090248
undefined Lewis auger bit with hexagonal shank
Ø 28 mm (1 1/8 in.), total length 650 mm (25 9/16 in.)
090249
undefined Lewis auger bit with hexagonal shank
Ø 30 mm (1 3/16 in.), total length 650 mm (25 9/16 in.)
090250
undefined Lewis auger bit with hexagonal shank
Ø 8 mm (5/16 in.), total length 460 mm 18 1/8 in.)
090251
undefined Lewis auger bit with hexagonal shank
Ø 10 mm (3/8 in.), total length 460 mm (18 1/8 in.)
090252
undefined Lewis auger bit with hexagonal shank
Ø 12 mm (1/2 in.), total length 460 mm (18 1/8 in.)
090253
undefined Lewis auger bit with hexagonal shank
Ø 14 mm (9/16 in.), total length 460 mm (18 1/8 in.)
090254
undefined Lewis auger bit with hexagonal shank
Ø 16 mm (5/8 in.), total length 460 mm (18 1/8 in.)
090255
undefined Lewis auger bit with hexagonal shank
Ø 18 mm (11/16 in.), total length 460 mm (18 1/8 in.)
090256
undefined Lewis auger bit with hexagonal shank
Ø 20 mm (13/16 in.), total length 460 mm (18 1/8 in.)
090257
undefined Lewis auger bit with hexagonal shank
Ø 22 mm (7/8 in.), total length 460 mm (18 1/8 in.)
090258
Image Description Ref. No.
undefined Lewis auger bit with hexagonal shank
Ø 24 mm (15/16 in.), total length 460 mm (18 1/8 in.)
090259
undefined Lewis auger bit with hexagonal shank
Ø 26 mm (1 in.), total length 460 mm (18 1/8 in.)
090260
undefined Lewis auger bit with hexagonal shank
Ø 28 mm (1 1/8 in.), total length 460 mm (18 1/8 in.)
090261
undefined Lewis auger bit with hexagonal shank
Ø 30 mm (1 3/16 in.), total length 460 mm (18 1/8 in.)
090262
undefined Lewis auger bit with hexagonal shank
Ø 6 mm (1/4 in.), total length 320 mm (18 1/8 in.)
090279
undefined Lewis auger bit with hexagonal shank
Ø 7 mm (1/4 in.), total length 320 mm (18 1/8 in.)
090280
undefined Lewis auger bit with hexagonal shank
Ø 8 mm (5/16 in.), total length 320 mm (18 1/8 in.)
090263
undefined Lewis auger bit with hexagonal shank
Ø 9 mm (3/8 in.), total length 320 mm (18 1/8 in.)
090264
undefined Lewis auger bit with hexagonal shank
Ø 10 mm (3/8 in.), total length 320 mm (18 1/8 in.)
090265
undefined Lewis auger bit with hexagonal shank
Ø 12 mm (1/2 in.), total length 320 mm (18 1/8 in.)
090266
undefined Lewis auger bit with hexagonal shank
Ø 14 mm (9/16 in.), total length 320 mm (18 1/8 in.)
090267
undefined Lewis auger bit with hexagonal shank
Ø 16 mm (5/8 in.), total length 320 mm (18 1/8 in.)
090268
undefined Lewis auger bit with hexagonal shank
Ø 18 mm (11/16 in.), total length 320 mm (18 1/8 in.)
090269
undefined Lewis auger bit with hexagonal shank
Ø 20 mm (13/16 in.), total length 320 mm (18 1/8 in.)
090270
undefined Lewis auger bit with hexagonal shank
Ø 22 mm (7/8 in.), total length 320 mm (18 1/8 in.)
090271
undefined Lewis auger bit with hexagonal shank
Ø 24 mm (15/16 in.), total length 320 mm (18 1/8 in.)
090272
undefined Lewis auger bit with hexagonal shank
Ø 26 mm (1 in.), total length 320 mm (18 1/8 in.)
090273
undefined Lewis auger bit with hexagonal shank
Ø 28 mm (1 1/8 in.), total length 320 mm (18 1/8 in.)
090274
undefined Lewis auger bit with hexagonal shank
Ø 30 mm (1 3/16 in.), total length 320 mm (18 1/8 in.)
090275
undefined Case with auger bits 320
6 pieces Lewis auger bits Ø 8, 10, 12, 14, 16, 18 mm
093290
undefined Case with auger bits 460
6 pieces Lewis auger bits Ø 8, 10, 12, 14, 16, 18 mm
093291
undefined Case with auger bits 650
5 pieces Lewis auger bits Ø 12, 14, 16, 18, 20 mm
093292
undefined Drilling station BST 320
Drilling station BST 460 / BST 320
961210
undefined Drilling station BST 460
Drilling station BST 460 / BST 320
961211
undefined Drilling station BST 460 S
Drilling station BST 650 S / BST 460 S
961215
undefined Drilling station BST 650 S
Drilling station BST 650 S / BST 460 S
961216
undefined Main picture
jpg, 1417 × 1417 Pixel,
397.3 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
396.6 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
359.8 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
431.0 kB