DuoDoweler

1 auxiliary rest ZA
1 set of additional stops ZAG
1 hose connector
1 position indicator PAZ
2 Anti-slip mats, wrapped	Ref. No. 095063
1 Bottle for glue 250 ml (without glue)	Ref. No. 095059
1 Allen key with handle	Ref. No. 093282
1 Mains cable 4 m (13.1 ft)	Ref. No. 077015
2 carbide dowel drills-HW, dia. 8 mm
2 carbide dowel drills-HW, dia. 6 mm
1 pack of wooden dowels, 8 x 30 mm, qty. 200
1 pack of wooden dowels, 6 x 30 mm, qty. 350
1 Dowel nozzle Ø 8 mm	Ref. No. 095060
1 side fence set SA 320	Ref. No. 206490
1 stop pin insert for battens LA	Ref. No. 206491

• Rows of holes
• Drilling for fittings/hardware
• Ideal for carcass and staircase construction in the workshop and on site
• Compatible materials include solid wood and board materials
• All types of joints from 3 - 12 mm (1/8 in. - 1/2 in.)

• The rotary knob and scale allow the tilting fence to be accurately repositioned up to a height of 62 mm (2 7/16 in.) . Regularly occurring dimensions can be preset by way of the turret.
• Two spring-loaded pins in the baseplate enable the user to drill holes at a fixed distance of 15,5 mm (5/8 in.) from the edge of the work; repetitive drilling without any measuring or marking is simple.
• The ergonomic motor housing, with a molded grip at the front and a hump at the rear, gives the operator a perfect hold no matter what the job, while ensuring the ideal transmission of force to the machine.
• The tilting fence is located on two columns and fastened with a single adjusting screw. For miter joints, it tilts continuously from 0 through 90 degrees. Indexing stops are provided at 22.5°, 45° and 67.5°.

• The DuoDoweler DDF 40 introduces greater ease and efficiency to the task of drilling accurate dowel holes. Its hallmarks are a broad range of applications, a new ergonomic design for easy handling, and absolutely aligned, stable joints.
• Whether in the workshop or on site, no other hand-held power tool can produce such high-quality joints.
• When producing corner joints, partitions or rows of holes, the DDF 40 offers not only the precision of a stationary machine, but also the cost savings associated with standard wooden dowels.
• In addition, the technique of using dowels in pairs already achieves outstanding stability at the dry assembly stage.

Image	Description	Ref. No.
	Dowel drill bit-HS Ø 3 mm	090083
	Dowel drill bit-HW Ø 5 mm (3/16 in.)	090089
	Dowel drill bit-HW Ø 6 mm	090096
	Dowel drill bit-HW Ø 6,1 mm	090120
	Dowel drill bit-HW Ø 8 mm	090097
	Dowel drill bit-HW Ø 8,1 mm	090122
	Dowel drill bit-HW Ø 8,2 mm	090123
	Dowel drill bit-HW Ø 10 mm (3/8 in.)	090098

Image	Description	Ref. No.
	Dowel drill bit-HW Ø 10,1 mm	090124
	Dowel drill bit-HW Ø 10,2 mm	090125
	Dowel drill bit-HW Ø 12 mm (1/2 in.)	090099
	Dowel drill bit-HW Ø 12,2 mm	090127
	Anti-slip mats 2 pieces	095063
	Side set SA 320 With edge guide. For machining at a large distance from the edge, in the range 105 – 320 mm (4 1/8 – 12 5/8 inch).	206490
	Stop pin insert for battens LA For drilling narrow battens in the range 14 – 48 mm. (9/16 – 1 7/8 inch).	206491