Dust Extractor M

Portable Circular Carpentry Saw MKS 145 Ec - US 120V

Portable Circular Carpentry Saw MKS 145 Ec

ref.no.: 924722

  • boxed
Cuprex Suction Safety brake Variable depth Lightweight Tilt angle 60° Guide system Fast tool change Variable speed
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 2 9/16 - 5 11/16 Inch
Cutting depth at 45° 1 13/16 - 4 1/16 Inch
Cutting depth at 60° 1 1/4 - 2 7/8 Inch
Tilt range 0 - 60 °
Nominal No. of strokes – no load 1900 - 2300 1/min
Nominal power input 3.4 hp
Weight 30.4 lbs
Universal motor 120 V
1 Allen key 6 mm Ref. No. 093081
1 Parallel guide fence
1 TCT saw blade 370 x 2.2/4.2 x 30 mm (14 9/16 in.), AT, 26 teeth (MKS 145 Ec) Ref. No. 092526
undefined Top results, as shown here with the MKS 165 Ec, can only be achieved with original MAFELL tools.
undefined The cutting depth can be adjusted easily via a precise handwheel.
undefined The tilt range of 0° – 60° enables extreme bevel cuts.
undefined The constant cut display.
  • Cross-cutting and rip cuts
  • Bevel cuts up to 60°
  • General joining work
  • Compatible materials include solid wood, laminated beams, insulating materials
  • Continuously variable speed control for individual requirements and applications.
  • Lower saw guard with remote control - for easy release of the saw blade, e.g. when positioning at sharp angles.
  • Constant cut display for 0° - 60° - due to exact centre of rotation, which is on the unterside of the base plate.
  • With tool brake - for optimum operator safety and work processes.
  • Carpenter´s portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys.
  • Tilt through 60° makes the portable circular saws a universal partner.
  • An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement.
  • The saw´s handling and behavior are refined by smooth starting, constant speeds under load, speed reduction and overload protection.
  • The easy-to-use stop system of the MKS and the adjustable hose connector make your work much easier.
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long
204380
undefined Guide rail F 110
1.1 m (3.6 ft) long
204381
undefined Guide rail F 160
1.6 m (5.2 ft) long
204365
undefined Guide rail F 210
2,1 m (6,9 ft) long
204382
undefined Guide rail F 310
3,1 m (10,2 ft) long
204383
undefined Connecting piece F-VS
for joining two guide rails
204363
undefined Angle fence F-WA 205357
undefined Guide pocket F 160
for guide rails up to 1,6 m
204626
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket
204805
undefined Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket
204749
Image Description Ref. No.
undefined End cap F-EK
2 pieces
205400
undefined Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long
204376
undefined Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long
204375
undefined Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece
207770
undefined Guide rail
length 3 m (9.8 ft) (2 pieces with connecting piece)
037037
undefined Guide rail
length 3 m (9.8 ft) (one piece)
200672
undefined Guide rail extension
length 1,5 m (4.9 ft)
036553
undefined Adapters (pair)
for parallel guide fence
037195
undefined TCT saw blade
370 x 2.2/4.2 x 30 mm (14 9/16 in.), AT, 26 teeth, for universal use (MKS 145 Ec)
092526
undefined TCT saw blade
370 x 2.2/4.2 x 30 mm (14 9/16 in.), AT, 18 teeth, for ripping cuts (MKS 145 Ec)
092524
undefined Main picture
jpg, 1417 × 1417 Pixel,
449.6 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
303.0 kB
undefined Images in use 2
jpg, 579 × 579 Pixel,
136.6 kB
undefined Images in use 3
jpg, 579 × 579 Pixel,
81.9 kB
undefined Images in use 4
jpg, 579 × 579 Pixel,
110.7 kB