Zero joint edge bander

MAFELL-ONLINE Edge Zero joint edge bander
undefined

Zero joint edge bander HIT-M 103 SA

Zero joint edge bander HIT-M

ref.no.: 9K0004

PDF download Prospectus Operating instructions Product from dealer
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Nominal voltage 230 V
Nominal power input 4.1 hp
Edge height 3/8 - 4 ¹/16 Inch
Tilt range 0 - 50 °
Edge thickness ¹/64 - ¹/8 Inch
Min. inside radius 3/8 Inch
Heating time
Temperature max. 968 ° F
Infinitely variable feed rate 3.3 - 18.0 ft/min
Connection compressed air
Weight lbs
Dimensions (L x W x H) 8 11/16 x 6 5/16 x 15 3/4 Inch
1 swivelling driven roller
1 Tanos systainer size 5
1 swivelling support plate
1 cleaning brush
2 locking bolts (short and long)
1 hexagon socket 3 mm (¹/8 in)
1 hexagon socket 4 mm (3/16 in)
1 hexagon socket 5 mm (3/16 in)
1 hexagon socket 6 mm (1/4 in)
1 connection package 5 m (16,4 ft) (voltage/compressed air)
undefined All commercially available edges from 0.4 - 3 mm (¹/64 - ¹/8 in) with pre-coated or post-coated functional layer can be processed with the HIT-M.
undefined For bevelled plate edges, the support plate can be swivelled up to 50°.
undefined Especially due to the driven pressure roller of the SA-model, extreme inner radii as from 10 mm can be effortlessly implemented.
undefined A clear arrangement of the control elements makes working with the device simple and intuitive.
  • Optimally suited for larger moulded parts, for example, and for use on the construction site.
  • For panel materials with edge heights of up to 103 mm
  • For bevelled plate edges, the support plate can be swivelled up to 50°.
  • Automatic edge feed with edge detection as stop function.
  • A clear arrangement of the control elements makes working with the device simple and intuitive.
  • Connection socket for optionally available foot switch.
  • The HIT-M is the first and only mobile device for creating an optical zero joint. With the hot air injection technique, all customary zero joint edges with applied functional layer can be processed - without the use of additional adhesive.
  • The HIT-M can be flexibly used and is ideal for intricate components. Especially with free-forms or tight radii it shows its great strengths.
  • Perfectly straight, bevelled, curved and round panel materials as well as moulded parts can be processed. Inclined cut surfaces of up to 55° can be easily achieved.
  • The working temperature is reached a few seconds after switching on the unit. With the HIT-M there is no need for time-consuming colour changes or cleaning of glue pans.
Image Description Ref. No.
undefined Machining table BAT+
Machining table BAT 		9K0101
undefined Machining table BAT
Machining table BAT 		9K0102
undefined Foot switch
momentary/latching 		208469
undefined Hold-down device
with roller for guiding workpieces on the BAT 		208470
undefined Vacuum plate D 160
for machining table BAT 		208471
undefined Vacuum plate
for machining table BAT, 200 x 55 mm 		208472
undefined Vacuum plate
for machining table BAT, 255 x 55 mm 		208473
Image Description Ref. No.
undefined Vacuum plate
for machining table BAT, 370 x 80 mm 		208474
undefined Table extension
for machining table BAT, each 600 x 490 mm 		208475
undefined Plastic ball casters
for machining table BAT, 10 pieces 		208477
undefined Strip magazine holder
for machining table BAT 		208479
undefined Strip magazine
for machining table BAT, 		208956
undefined Shims
for machining table BAT, 0.8mm, set 		208476
undefined Main picture
jpg, 1417 × 1417 Pixel,
382.2 kB
undefined Images in use 1
jpg, 1417 × 1417 Pixel,
262.7 kB
undefined Images in use 2
jpg, 1417 × 1417 Pixel,
344.6 kB
undefined Images in use 3
jpg, 1417 × 1417 Pixel,
240.7 kB
undefined Images in use 4
jpg, 1417 × 1417 Pixel,
306.5 kB
clip