Portable Circular Saw K 85 Ec
ref.no.: 91C621
Cutting depth | 0 - 3 7/16 Inch |
Cutting depth at 45° | 0 - 2 7/16 Inch |
Cutting depth at 60° | 1/16 - 1 3/4 Inch |
Tilt range | 0 - 60 ° |
Nominal power input | 3.1 hp |
Weight | 14.8 lbs |
Universal motor | 230 V / 50 Hz |
Nominal No. of strokes – no load | 2250 - 4400 1/min |
1 TCT saw blade 237 x 1.8/2.5 x 30 mm (9 5 /16 in.), AT, 12 teeth, for rip cuts in wood | Ref. No. 092590 |
1 Hose connector for chip extraction | Ref. No. 205290 |
1 Allen key 5 mm | Ref. No. 093034 |
Image | Description | Ref. No. |
---|---|---|
Guide rail F 80
0,8 m (2,6 ft) long |
204380 | |
Guide rail F 110
1.1 m (3.6 ft) long |
204381 | |
Guide rail F 160
1.6 m (5.2 ft) long |
204365 | |
Guide rail F 210
2,1 m (6,9 ft) long |
204382 | |
Guide rail F 310
3,1 m (10,2 ft) long |
204383 | |
Connecting piece F-VS
for joining two guide rails |
204363 | |
Angle fence F-WA | 205357 | |
Suction clamping system Aeroxfix F-AF 1
with 1,3 m rail, adapters for above and underneath rail, flexible hose |
204770 | |
Flexible hose FXS-L
up to 3,2 m (10.6 ft) long |
205276 | |
Guide pocket F 160
for guide rails up to 1,6 m |
204626 | |
Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket |
204805 | |
Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket |
204749 |
Image | Description | Ref. No. |
---|---|---|
End cap F-EK
2 pieces |
205400 | |
Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long |
204376 | |
Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long |
204375 | |
Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece |
207770 | |
Guide track L
max. cutting length 370 mm (14 9/16 in.) |
208171 | |
Parallel guide fence | 205323 | |
Roller edge guide
K 85-UA |
205166 | |
L-MAX
with insert |
095170 | |
TCT saw blade
237 x 1,8/2,5 x 30 mm (9 5/16 in.), AT, 24 teeth, for rip cuts and cross-cutting in wood |
092591 | |
TCT saw blade
237 x 1.8/2.5 x 30 mm (9 5/16 in.), AT, 12 teeth for rip cuts in wood |
092590 | |
TCT saw blade
237 x 1.8/2.5 x 30 mm (9 5/16 in.), AT, 56 teeth for cross-cutting in wood |
092592 |