MAFELL - online catalogue

Cutting height	- 1/16 - 3 3/8 Inch
Cutting height at 45°	- 1/16 - 2 3/8 Inch
Tilt range	-3 - 48 °
Cutting length	16 15/16 Inch
Table top dimensions	20 11/16 x 36 Inch
Working height without stand	16 5/16 Inch
Working height with stand	35 1/16 Inch
Nominal No. of strokes – no load	2.050 – 4.300 1/min
Nominal power input	3.4 hp
Extraction connection diameter	2 5/16 Inch
Weight (with multi-purpose guide fence MFA)	88.2 lbs
Cutting speed	ft/s
Universal motor	230 V / 50 Hz

1 TCT saw blade 250 x 2.8 x 30 mm (9 13/16 in.), AT, 40 teeth	Ref. No. 092465
1 Extension kit with wheels	Ref. No. 202889
1 MFA multi-purpose fence with angle locking	Ref. No. 207980
1 Push stick	Ref. No. 034901
1 Allen key 6 mm	Ref. No. 093081
1 Extraction set with 2 connectors	Ref. No. 093670
1 Clamping device	Ref. No. 038294
1 Fold-away support Quickstand
1 Mains cable 4 m (13.1 ft)

The sensor-controlled working light provides the best view of the cut. The partially transparent protective hood completely covers the saw blade and thus provides for greater safety.

Thanks to the great cutting height and cutting length, the ERIKA is ideally suited even for cutting solid timber and for carpentry applications.

Assembling and disassembling the ERIKA are simple one-man jobs. You can unfold the built-in fold-away support within seconds and without tools.

Unevenness of the surface can be levelled out with the level control simply by pressing down with the foot.

The multi-purpose guide fence allows two miter cuts without changing.

... or adjusting the fence. The result: perfect 90° joints.

Cross and rip cuts
Circular saw bench functionality
Bevel cuts up to 48°
Compatible materials include solid wood, board materials, parquet and laminate flooring, aluminum profiles and plastics

New type of suction channel revolutionises extraction - for less dust when working.
Lightest pull-push saw in its class – for quick and easy transportation.
Adjustable speed – for individual processing of wood, plastics or aluminum profiles.
With voltage loss switch for protection against uncontrolled reconnection after a power interruption.
The rear legs of the Erika are equipped with wheels for easy handling.

As the world's first pull-push saw, the ERIKA has become the epitome of mobile sawing since its introduction. After almost 40 years of experience, the current generation is now endowed with everything that users expect from a modern pull-push saw.
The built-in /Quickstand\ sets the ERIKA on 4 stable aluminium legs within seconds. Protective rubber stoppers on the feet also prevent slipping or knocking.
The unique suction channel concentrates the sawdust and extracts it to the rear. Thanks to this new development, your dust extractor is used even more effectively. The result: clean work on a clean construction site! Operation of the ERIKA leaves no questions unanswered. Clearly designed operating elements are all logically arranged on the front of the machine!
Thanks to the E-control electronic system and the corresponding MAFELL original saw blade, it is possible to process other materials in addition to wood, such as plastics or aluminium profiles.
Further advantages of the ERIKA 85: Extremely stable table profile, tilt range from -3° to 48° , lowerable riving knife and maximum cutting length of 430 mm (16 15/15 inch).

Image	Description	Ref. No.
	Universal guide fence with fence extension	201611
	Multi-purpose guide fence MFA with angle locking	207980
	Sliding table maximum cutting length 905 mm (35 5/8 in.)	038563
	Fence guide extension 1000 mm (39 3/8 in.) long, incl. drop stop	203396
	Connecting piece for connecting two fence guide extensions	038393
	Telescopic rod with sheet metal support, 960 mm (37 13/16 in.)	038309
	Clamping device	038294
	Extension table ERIKA 85 requires 2 support/mounting rails	208439
	Supporting rail 1000 mm (39 3/8 in.), 1 piece	038686

Image	Description	Ref. No.
	Drop stop	038306
	Extension kit with wheels	202889
	Chip collecting system Cleanbox Starter-Set	203402
	Chip collecting system Cleanbox 5 pieces	203575
	TCT saw blade 250 x 1.8/2.8 x 30 mm 9 13/16 in.), 24 teeth, AT, for ripping cuts	092472
	TCT saw blade 250 x 1.8/2.8 x 30 mm (9 13/16 in.), AT, 40 teeth, for universal use	092465
	TCT saw blade 250 x 1.8/2.8 x 30 mm (9 13/16 in.), AT, 60 teeth, for fine cuts	092466
	TCT saw blade 250 x 1.8/2.8 x 30 mm (9 13/16 in.), FT/TT, 68 teeth, for plastic an aluminium profiles	092467