Groove- and Multi-cutter

MAFELL-ONLINE Mortising Groove- and Multi-cutter
undefined

Tenoner ZAF 250 Vario

Tenoner

ref.no.: 991201

Suction Safety brake Tilt angle 60°
PDF download Prospectus Operating instructions Product from dealer
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Maximum timber sizes (W x H) for right angled tenons 19 11/16 x 9 13/16 Inch
Maximum timber sizes (W x H) for 60° angled tenons 8 11/16 x 9 13/16 Inch
Length of support (with scale for adjusting length stop) 118 1/8 Inch
Feed rate speed 2.9 - 7.2 ft/min
Place requirement
Nominal No. of strokes – no load 6670 1/min
Nominal power input 8.0 hp
Weight 864.4 lbs
Three-phase AC motor 400 V / 50 Hz
1 Cutter head, complete with reversible knives TCT Ref. No. 202105
Support table Ref. No. 205025
undefined Laser technology allows positioning of the workpiece after marking.
undefined The 3 m (9.8 ft) long support profile with mm scale and length stop allows precise positioning of the workpieces.
undefined Straight and angled tenons are executed in a single work cycle as the control permits machining on 4 sides. This also allows all-round chamfering of the tenons.
undefined Clear, transparent layout – the controls of the ZAF 250 Vario for automatic or manual operation.
  • Cutting tenons and laps up to 60°
  • Compatible materials include solid wood and laminated beams
  • Considerable time-saving – due to quick and easy adjustment of length, angle and tenon dimensions.
  • Maximum timber dimensions 500 x 250 mm (19 11/16 x 9 13/16 in.) at 0° and 220 x 250 mm (8 11/16 x 9 13/16 in.) at 60°.
  • Minimum space requirement – thanks to the swiveling cutter head, the timber always remains in the same position.
  • No chip waste – fully extractable.
  • The ZAF 250 Vario executes the full range of tenons quickly, accurately, efficiently and precisely.
  • For straight or angled tenons, corner or ridge half-lap joints, you can always count on the ZAF 250 Vario Tenoner.
  • To ensure exact length measurements, the stop is adjusted on a scale.
  • Developed specifically for the ZAF 250 Vario, the cutting tool can be rapidly adapted for different tenon lengths and half-lap joints.
  • The ZAF 250 Vario has precision setting options and a clearly laid-out control panel. Precise positioning of the timber is facilitated by a new built-in laser. The result is cuts which are accurate to the nearest millimeter (inch) in all types of timber!
  • After setting the desired tenon geometry, the cutter head automatically executes the required shape - including angled, haunched and chamfered cuts.
  • For hardwood applications the ZAF 250 Vario has an adjustable feed rate. Chip waste is extractable as a matter of course.
Image Description Ref. No.
undefined Extractor set 202320
undefined Reversible knives
14 x 14 x 2 mm (9/16 x 9/16 x 1/16 in.) 		201927
Image Description Ref. No.
undefined Chamfer knifves 201930
undefined Main picture
jpg, 3360 × 3360 Pixel,
619.6 kB
undefined Images in use 1
jpg, 1063 × 709 Pixel,
40.7 kB
undefined Images in use 2
jpg, 1063 × 709 Pixel,
48.7 kB
undefined Images in use 3
jpg, 1063 × 709 Pixel,
58.7 kB
undefined Images in use 4
jpg, 1063 × 709 Pixel,
49.7 kB