Notch Cutting Machine

Cross-Cutting System KSS 50 cc - USA 120 V

Cross-Cutting System KSS 50 cc

ref.no.: 918923

PDF download Prospectus Operating instructions Product from dealer

Technical data

Delivery specification

Examples for usage

Applications

Advantages

Description

Accessories / Tools

Media centre

Cutting depth at 0° with guide track	0 - 2 1/6 Inch
Cutting depth 45° with track	0 - 1 5/8 Inch
Cutting depth at 0 ° without guide track	0 - 2 5/16 Inch
Cutting depth 45° without guide track	0 - 1 7/8 Inch
Tilt range	0 – 45 °
Cutting length	16 Inch
Angle cuts	-60 – +60 °
Nominal No. of strokes – no load	5700 1/min
Nominal power input	1.7 hp
Weight with guide rail	11.9 lbs
Universal motor	120 V / 60 Hz


1 Allen key 5 mm	Ref. No. 093034
1 Guide track M, max. cutting length 400 mm (15 3/4 in.)	Ref. No. 208170

The highly graduated scale permits very precise angle setting.

The fixed and adjustable stops on the underside of the rail allow the system to be used for angle cuts from +60° to -60°.

Thanks to the generously-sized angle scale, miter cuts always ensure a perfect fit – as seen here with exterior cladding.

One-stop solution: with the cross-cutting system, the machine is permanently attached to the guide track.

Cross cuts with guide
Rip cuts and cross-cutting
Plunge cuts and recesses
Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials

Thanks to the unique tilting system, a cutting depth of 42 mm (including rail) is always available in the angle range from 0° to 45°.
The machine can be removed from the cross-cut track at the single press of a button, allowing its use for the full range of applications offered by the K 55 cc.
The rubberized underside ensures a good grip on the work and avoids damage to the surface.

With their low weight and cutting depths of up to 52 mm on the track, MAFELL’s new, powerful cross-cutting systems are making a big impact when it comes to interior work, for example.
Once the cut has been executed, the saw automatically returns to the starting position. The maximum cutting length, exploiting the full cutting depth, is 407 mm.
It is no longer necessary to unscrew the riving knife – the FLIPPKEIL offers you optimum user-friendliness and safety when plunge cutting.

Image	Description	Ref. No.
	Guide rail F 80 0,8 m (2,6 ft) long	204380
	Guide rail F 110 1.1 m (3.6 ft) long	204381
	Guide rail F 160 1.6 m (5.2 ft) long	204365
	Guide rail F 210 2,1 m (6,9 ft) long	204382
	Guide rail F 310 3,1 m (10,2 ft) long	204383
	Guide track M max. cutting length 400 mm (15 3/4 in.)	208170
	Guide track ML max. cutting length 770 mm (30 5/16 in.)	204378
	Connecting piece F-VS for joining two guide rails	204363
	Angle fence F-WA	205357
	Suction clamping system Aeroxfix F-AF 1 with 1,3 m rail, adapters for above and underneath rail, flexible hose	204770
	Flexible hose FXS-L up to 3,2 m (10.6 ft) long	205276
	Guide pocket F 160 for guide rails up to 1,6 m	204626
	Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket	204805

Image	Description	Ref. No.
	Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket	204749
	End cap F-EK 2 pieces	205400
	Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long	204376
	Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long	204375
	Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece	207770
	Parallel guide fence K55-PA	206825
	Roller edge guide MF-UA	206073
	Dust bag	206921
	TCT saw blade 168 x 1,2/1,8 x 20 mm, Z 16, WZ, for ripping in wood	092476
	TCT saw blade 168 x 1,2/1,8 x 20 mm, Z 24, WZ, for universal use with wood	092478
	TCT saw blade 168 x 1,2/1,8 x 20 mm, Z 32, WZ, for fine sawing in wood	092480
	TCT saw blade 168 x 1,2/1,8 x 20 mm, Z 56, WZ, for cross-cutting wood	092482