Insulation saw DSS 300 cc
ref.no.: 919621
Cutting depth | 12 1/16 Inch |
Cutting depth at 45° | 8 1/8 Inch |
Cutting depth at 60° | 5 9/16 Inch |
Cutting width | 1/4 Inch |
Tilt range | 60 ° |
Tilting range to rear | 45 ° |
Nominal No. of strokes – no load | 4700 1/min |
Nominal power input | 2.4 hp |
Extraction connection diameter | 1 3/8 Inch |
Weight | 18.2 lbs |
Universal motor | 230 V / 50 Hz |
2 Cutting wires, 6 mm wide | |
1 Double-sided toothed belt | |
1 Auxiliary rest/glider | |
2 Cable cover K-Fix | |
1 Mains cable 4 m - GB 230 V | Ref. No. 087802 |
Image | Description | Ref. No. |
---|---|---|
Guide rail F 80
0,8 m (2,6 ft) long |
204380 | |
Guide rail F 110
1.1 m (3.6 ft) long |
204381 | |
Guide rail F 160
1.6 m (5.2 ft) long |
204365 | |
Guide rail F 210
2,1 m (6,9 ft) long |
204382 | |
Guide rail F 310
3,1 m (10,2 ft) long |
204383 | |
Connecting piece F-VS
for joining two guide rails |
204363 | |
Angle fence F-WA | 205357 | |
Guide pocket F 160
for guide rails up to 1,6 m |
204626 | |
Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket |
204805 | |
Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket |
204749 | |
End cap F-EK
2 pieces |
205400 | |
Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long |
204376 | |
Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long |
204375 |
Image | Description | Ref. No. |
---|---|---|
Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece |
207770 | |
Cutting wire DSS-SR
incl. 2 sweeper and 1 pulley guard |
206370 | |
Double-sided toothed belt DSS-DZ | 206371 | |
Machine holder S200-MH | 207164 | |
Track clamp F-FIX
2 pieces |
206760 | |
Cable cover K-Fix
2 pieces |
206369 | |
Parallel guide fence | 205323 | |
Roller edge guide
K 85-UA |
205166 | |
Guide unit ST-FE 200
incl. guide track, mounting bracket and auxiliary rest |
207277 | |
Chip bag S 200
2 pieces |
093791 | |
High-capacity extractor S 200 | 206869 | |
Workbench ST 1700 Vario
Workbench ST 1700 Vario |
91A601 |