Cordless drill drivers

Insulation saw DSS 300 cc in carrying case - GB 230 V

Insulation saw DSS 300 cc

ref.no.: 919621

in carrying case

PDF download Prospectus Operating instructions Product from dealer

Technical data

Delivery specification

Examples for usage

Applications

Advantages

Description

Accessories / Tools

Media centre

Cutting depth	12 1/16 Inch
Cutting depth at 45°	8 1/8 Inch
Cutting depth at 60°	5 9/16 Inch
Cutting width	1/4 Inch
Tilt range	60 °
Tilting range to rear	45 °
Nominal No. of strokes – no load	4700 1/min
Nominal power input	2.4 hp
Extraction connection diameter	1 3/8 Inch
Weight	18.2 lbs
Universal motor	230 V / 50 Hz

2 Cutting wires, 6 mm wide
1 Double-sided toothed belt
1 Auxiliary rest/glider
2 Cable cover K-Fix
1 Mains cable 4 m - GB 230 V	Ref. No. 087802

Perfect interaction of all system components and innovative details, including the cutting wire, carbon guide fin and chip sweepers, achieve a high-precision cut.

Insert a track clamp in both ends of the guide track, offer up the track and press the tips into the material. Attach the glider, offer up the DSS 300 cc, make the cut and the job’s done.

Flexible materials, as used to insulate the space between studs for example, can be cut quickly and accurately with the DSS 300 cc as well.

For exact bevel cuts, the DSS 300 cc can be continuously pivoted through 60° referencing the scale. To make the cut, use an auxiliary rest on or alongside the guide track.

Detach the double-sided toothed belt and lower the pulley. Thanks to the unique cutting wire, the DSS 300 cc can cut in practically any direction.

Attach the guide track to the long side of the opening. Cut the short side freehand, following a mark. Cut the long side by running the tip of the base plate along the guide track.

Rip cuts and cross-cutting
Bevel cuts
Compatible materials include: Wood fiber insulation board (pressure-resistant, flexible), PUR rigid foam (without underlay),Styropor EPS, Styrodur XPS

2-Dimensional tilting - The DSS 300 cc can cut at tilt angles up to 60°. In addition, the cutting wire and riving knife can be tilted back through 45°.
The carbon guide fin achieves extreme rigidity and, thanks to reduced weight, delivers the required cutting precision.
Automatic wire tensioning ensures consistency and supreme cutting quality.
The CUprex highperformance motor stands for sheer strength and outstanding motive power.
The double-sided toothed belt convey chips and dust away from the kerf and improve both extractor performance and cutting precision.

The MAFELL DSS 300 cc is a unique wire saw for cutting pressureresistant and flexible wood fiber insulating materials. Precision cutting for a perfect fit improves building insulation, eliminates thermal bridges and thus prevents structural damage. The DSS 300 cc is instrumental in ensuring that insulation work is performed with the utmost efficiency.
Perfect interaction of all system components and innovative details, including the cutting wire, carbon guide fin and chip sweepers, achieve a high-precision cut. This integrated system, which also includes the high-capacity extractor S 200 and workbench ST 1700 Vario, is simply unbeatable.
Given the appropriate accessories, insulating materials can be cut precisely in an almost infinite number of ways. The compact and highly flexible workbench allows you to work with extreme accuracy, even when making very long cuts. A more pleasant working atmosphere and ease of handling are ensured by the powerful high-capacity extractor.

Image	Description	Ref. No.
	Guide rail F 80 0,8 m (2,6 ft) long	204380
	Guide rail F 110 1.1 m (3.6 ft) long	204381
	Guide rail F 160 1.6 m (5.2 ft) long	204365
	Guide rail F 210 2,1 m (6,9 ft) long	204382
	Guide rail F 310 3,1 m (10,2 ft) long	204383
	Connecting piece F-VS for joining two guide rails	204363
	Angle fence F-WA	205357
	Guide pocket F 160 for guide rails up to 1,6 m	204626
	Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket	204805
	Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket	204749
	End cap F-EK 2 pieces	205400
	Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long	204376
	Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long	204375

Image	Description	Ref. No.
	Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece	207770
	Cutting wire DSS-SR incl. 2 sweeper and 1 pulley guard	206370
	Double-sided toothed belt DSS-DZ	206371
	Machine holder S200-MH	207164
	Track clamp F-FIX 2 pieces	206760
	Cable cover K-Fix 2 pieces	206369
	Parallel guide fence	205323
	Roller edge guide K 85-UA	205166
	Guide unit ST-FE 200 incl. guide track, mounting bracket and auxiliary rest	207277
	Chip bag S 200 2 pieces	093791
	High-capacity extractor S 200	206869
	Workbench ST 1700 Vario Workbench ST 1700 Vario	91A601