Drilling station

1 Allen key 5 mm	Ref. No. 093034
1 TCT sawblade 162 x 1.2/1.8 x 20 mm, 48 alternating teeth, for universal use with board materials	Ref. no. 092584

• Cross-cutting and rip cuts
• Bevel cuts -1 to +48°
• Plunge cuts
• Compatible materials include solid wood, cement fiberboard, melamine resin panels (Trespa), OSB, gypsum fiberboard, plastics, façade boards and various board materials

• Facility for extremely fine adjustment of the cutting depth setting, e.g. when working with a resharpened blade or with Fermacell.
• The closed saw blade cover and the slide bar at the saw-cut ensure a very low dust formation.
• The MT 55 cc is equipped with a new CUprex-Compact motor for significantly elevated speeds and ample power in reserve.
• The cutting depth can be set with millimeter precision. With or without a rail – simply turn the pointer to show the exact cutting depth.
• For bevel cuts, the angle setting is fixed in two locations with half a turn of a single locking screw.

• The idea of developing a new plunge-cut saw is not new in itself. The novel aspect of this development, however, was the origination of a unique precision product from a set of especially designed machine components.
• The plunge-cut saw MT 55 cc is a jack of all trades. It can execute plunge, parting, bevel and angled cuts with supreme precision and without any tearing.
• The scoring function is quickly activated in a single movement. The MT 55 cc then cuts visible edges as cleanly as a stationary machine, even if the splinter guard is worn.
• Continuously variable speed for a variety of materials and sawblades.
• The cutting depth range has now been extended to 57 mm (2 1/4 in.). Thanks to the innovative tilting system, the options afforded for bevel cuts are practically unlimited as well.

Image	Description	Ref. No.
	Guide rail F 80 0,8 m (2,6 ft) long	204380
	Guide rail F 110 1.1 m (3.6 ft) long	204381
	Guide rail F 160 1.6 m (5.2 ft) long	204365
	Guide rail F 210 2,1 m (6,9 ft) long	204382
	Guide rail F 310 3,1 m (10,2 ft) long	204383
	Connecting piece F-VS for joining two guide rails	204363
	Angle fence F-WA	205357
	Suction clamping system Aeroxfix F-AF 1 with 1,3 m rail, adapters for above and underneath rail, flexible hose	204770
	Flexible hose FXS-L up to 3,2 m (10.6 ft) long	205276
	Guide pocket F 160 for guide rails up to 1,6 m	204626
	Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket	204805
	Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket	204749
	End cap F-EK 2 pieces	205400
	Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long	204376

Image	Description	Ref. No.
	Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long	204375
	Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece	207770
	Position indicator MT-PA	205398
	Guide fence, cpl.	202867
	Parallel guide fence with wing screws	203214
	Roller edge guide MF-UA	206073
	TCT saw blade 162 x 1.2/1.8 x 20 mm (6 3/8 in.), AT, 48 teeth, for universal use with board materials	092584
	TCT saw blade 160 x 1,2/1,8 x 20 mm (6 5/16 in.), AT, 24 teeth, for universal use in wood	092533
	TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.), AT, 16 teeth, for rip cuts in wood	092539
	TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood	092552
	TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.) / FT/TT, 56 teeth, for fine sawing	092553
	TCT saw blade 160 x 1.2/1.8 x 20 mm, (6 5/16 in.). FT/TT, 48 teeth (for Trespa)	092569
	Saw blade Dia 160 x 2.4/3.0 x 20 mm (6 5/16 in.) / 4 flat/trapezoidal teeth for cement-bonded materials	092474
	Dust bag	206921