Pull-Push Saw

Portable Circular Saw K 85 Ec in L-Max

ref.no.: 918202

PDF download Prospectus Operating instructions Product from dealer

Technical data

Delivery specification

Examples for usage

Applications

Advantages

Description

Accessories / Tools

Media centre

1 TCT saw blade 237 x 1.8/2.5 x 30 mm (9 5 /16 in.), AT, 12 teeth, for rip cuts in wood	Ref. No. 092590
1 Parallel guide fence	Ref. 205323
1 Hose connector for chip extraction	Ref. No. 205290
1 Allen key 5 mm	Ref. No. 093034
1 Mains cable 4 m (13.1 ft)	Ref. No. 087888

Thanks to the unique tilting system, the sawblade always cuts directly along the rubber lip, irrespective of the angle setting.

Working close to the edge is facilitated by the K 85-UA roller edge guide. Use the scale marked on the arm to set the spacing.

By retracting blade alongside the second handle, offering up the machine is easy and safe, especially when executing bevel cuts.

The sawblade and pivoting guard can be locked with a single action. This practical solution engages the starting lockout at the same time.

Cross-cutting and rip cuts
Bevel / compound miter cuts up to 60°
Birdsmouth cuts
Plunge cuts
Chamfers and grooves
Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials

The K 85 / K 85 Ec offers an enhanced cutting depth of up to 88 mm (3 7/16 in.). Even when used in conjunction with the guide rail, it achieves an exceptional depth of 82 mm (3 3/16 in.).
Optimum chip ejection, especially when sawing insulating materials.
Sawing to mark. The pointer adjusts automatically to the set tilt angle.
The cutting depth is set and locked in a single, quick action.
Thanks to the new tilting arrangement of the K 85 / K 85 Ec, reading the scale is easier than ever before.

The MAFELL portable circular saw combines power and precision with ease of use and ergonomic design. These properties transform the machine into a unique system.
Sheer power and high torque take on a whole new meaning with the new high-output CUprex motor. It offers performance-optimized digital electronics and newly developed control technology. Its speed is continuously variable according to the nature of the material and application.
It is no longer necessary to unscrew the riving knife – the FLIPPKEIL offers you optimum user-friendliness and safety when plunge cutting.

Image	Description	Ref. No.
	Guide rail F 80 0,8 m (2,6 ft) long	204380
	Guide rail F 110 1.1 m (3.6 ft) long	204381
	Guide rail F 160 1.6 m (5.2 ft) long	204365
	Guide rail F 210 2,1 m (6,9 ft) long	204382
	Guide rail F 310 3,1 m (10,2 ft) long	204383
	Connecting piece F-VS for joining two guide rails	204363
	Angle fence F-WA	205357
	Suction clamping system Aeroxfix F-AF 1 with 1,3 m rail, adapters for above and underneath rail, flexible hose	204770
	Flexible hose FXS-L up to 3,2 m (10.6 ft) long	205276
	Guide pocket F 160 for guide rails up to 1,6 m	204626
	Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket	204805
	Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket	204749

Image	Description	Ref. No.
	End cap F-EK 2 pieces	205400
	Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long	204376
	Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long	204375
	Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece	207770
	Guide track L max. cutting length 370 mm (14 9/16 in.)	208171
	Parallel guide fence	205323
	Roller edge guide K 85-UA	205166
	L-MAX with insert	095170
	TCT saw blade 237 x 1.8/2.5 x 30 mm (9 5/16 in.), AT, 12 teeth for rip cuts in wood	092590
	TCT saw blade 237 x 1,8/2,5 x 30 mm (9 5/16 in.), AT, 24 teeth, for rip cuts and cross-cutting in wood	092591
	TCT saw blade 237 x 1.8/2.5 x 30 mm (9 5/16 in.), AT, 56 teeth for cross-cutting in wood	092592