MAFELL - online catalogue

Collar diameter	1 11/16 Inch
Chuck capacity	1/2 Inch
Max. drilling diameter in wood / steel	1 15/16 / 1/2 Inch
Torque soft / hard	44 / 90 Nm
Impulse torque (soft)	49 Nm
1st speed range	0 - 600 1/min
2nd speed range	0 - 2050 1/min
Weight (including battery	4.2 lbs
Nominal voltage	18 V
Impact rate	38950 1/min
Torque settings	11

1 Quick-release chuck A-SBF 13	Ref. No. 206772
1 Quick-release bit holder A-SBH	Ref. No. 206766
1 Battery-PowerStation APS 18 M - GB	Ref. No. 094454
2 Battery PowerTanks 18 M 72	Ref. No. 094432
1 Belt clip
1 Auxiliary handle
1 Bit PZ 2

Swap the bit holder, chuck and angle head in a matter of seconds – it‘s easy with the clever quick-release system. Pull out, insert, ready to go.

Drilling in wood with a 50 mm Lewis auger bit? Not a problem for the A 18 M bl and ASB 18 M bl with auxiliary handle.

The battery permanently displays its exact charge, even when it is detached.

The ASB 18 M bl combines three cordless machines in one: a driver, a conventional drill, and a percussion drill.

Drilling
Driving
Percussion drilling
Ideal for construction sites

The convenient function switch on the top of the cordless drill driver selects the drilling, driving and impulse modes.
The maintenance-free brushless motor ensures a long service life and, thanks to its high efficiency, makes best possible use of the battery capacity.
With two bit holders on each side of the machine, the desired bit is always to hand.
The percussion drill function extends the application scope of the ASB 18 M bl.
Spindle with 1/4“ chuck directly accommodates bits and push-fit accessories.
43 mm diameter clamping collar fits all MAFELL BST drilling stations.
Bright LEDs illuminate a large working area.

Powerful, user-friendly, tough, resilient – MAFELL‘s new, high-output cordless drill drivers enhance the pleasure of doing a good job.
The large torque range gives access to extremely high twisting forces. Screws can be tightened carefully in a wide range of applications – with the appropriate torque selected, even large screws can be used.
Tool-free quick-release system for speed and efficiency when alternating between drilling and driving.
The selectable impulse mode comes to the fore when confronted with immovable screws.
Thanks to the practical belt clip, the cordless drill driver is always within reach. It can be attached to the left or right of the machine without any tools.
The battery PowerTanks feature process-controlled technology.
All the relevant factors, including the individual cell state, air cooling and cell temperature are monitored. In addition, the floating battery cells are protected against mechanical influences.

Image	Description	Ref. No.
	Quick-release chuck A-SBF 13 13 mm (1/2 in.)	206772
	Quick-release bit holder A-SBH	206766
	Angle head A-WV 18 up to 100 Nm	094459
	Torque head A-DMV x3 3:1 ratio	094450
	Battery PowerTanks 18 M 72 LiHD Li-Ion, 18V, 72 Wh (LiHD)	094500
	Battery-PowerTank 18 M 99 LiHD Li-Ion, 18V, 99 Wh (LiHD)	094503
	Battery-PowerStation APS 18 M - GB 18 V	094493
	Battery-PowerStation APS 18M - GB 18 V	094454
	Battery-PowerStation APS 18M + - GB High-speed charger 18V	094440
	Lewis auger bit with hexagonal shank Ø 10 mm (3/8 in.), total length 650 mm (25 9/16 in.)	090240
	Lewis auger bit with hexagonal shank Ø 12 mm (1/2 in.), total length 650 mm (25 9/16 in.)	090241
	Lewis auger bit with hexagonal shank Ø 14 mm (9/16 in.), total length 650 mm (25 9/16 in.)	090242
	Lewis auger bit with hexagonal shank Ø 16 mm (5/8 in.), total length 650 mm (25 9/16 in.)	090243
	Lewis auger bit with hexagonal shank Ø 18 mm (11/16 in.), total length 650 mm (25 9/16 in.)	090244
	Lewis auger bit with hexagonal shank Ø 20 mm (13/16 in.), total length 650 mm (25 9/16 in.)	090245
	Lewis auger bit with hexagonal shank Ø 22 mm (7/8 in.), total length 650 mm (25 9/16 in.)	090246
	Lewis auger bit with hexagonal shank Ø 24 mm (15/16 in.), total length 650 mm (25 9/16 in.)	090247
	Lewis auger bit with hexagonal shank Ø 26 mm (1 in.), total length 650 mm (25 9/16 in.)	090248
	Lewis auger bit with hexagonal shank Ø 28 mm (1 1/8 in.), total length 650 mm (25 9/16 in.)	090249
	Lewis auger bit with hexagonal shank Ø 30 mm (1 3/16 in.), total length 650 mm (25 9/16 in.)	090250
	Lewis auger bit with hexagonal shank Ø 8 mm (5/16 in.), total length 460 mm 18 1/8 in.)	090251
	Lewis auger bit with hexagonal shank Ø 10 mm (3/8 in.), total length 460 mm (18 1/8 in.)	090252
	Lewis auger bit with hexagonal shank Ø 12 mm (1/2 in.), total length 460 mm (18 1/8 in.)	090253
	Lewis auger bit with hexagonal shank Ø 14 mm (9/16 in.), total length 460 mm (18 1/8 in.)	090254
	Lewis auger bit with hexagonal shank Ø 16 mm (5/8 in.), total length 460 mm (18 1/8 in.)	090255
	Lewis auger bit with hexagonal shank Ø 18 mm (11/16 in.), total length 460 mm (18 1/8 in.)	090256
	Lewis auger bit with hexagonal shank Ø 20 mm (13/16 in.), total length 460 mm (18 1/8 in.)	090257

Image	Description	Ref. No.
	Lewis auger bit with hexagonal shank Ø 22 mm (7/8 in.), total length 460 mm (18 1/8 in.)	090258
	Lewis auger bit with hexagonal shank Ø 24 mm (15/16 in.), total length 460 mm (18 1/8 in.)	090259
	Lewis auger bit with hexagonal shank Ø 26 mm (1 in.), total length 460 mm (18 1/8 in.)	090260
	Lewis auger bit with hexagonal shank Ø 28 mm (1 1/8 in.), total length 460 mm (18 1/8 in.)	090261
	Lewis auger bit with hexagonal shank Ø 30 mm (1 3/16 in.), total length 460 mm (18 1/8 in.)	090262
	Lewis auger bit with hexagonal shank Ø 6 mm (1/4 in.), total length 320 mm (18 1/8 in.)	090279
	Lewis auger bit with hexagonal shank Ø 7 mm (1/4 in.), total length 320 mm (18 1/8 in.)	090280
	Lewis auger bit with hexagonal shank Ø 8 mm (5/16 in.), total length 320 mm (18 1/8 in.)	090263
	Lewis auger bit with hexagonal shank Ø 9 mm (3/8 in.), total length 320 mm (18 1/8 in.)	090264
	Lewis auger bit with hexagonal shank Ø 10 mm (3/8 in.), total length 320 mm (18 1/8 in.)	090265
	Lewis auger bit with hexagonal shank Ø 12 mm (1/2 in.), total length 320 mm (18 1/8 in.)	090266
	Lewis auger bit with hexagonal shank Ø 14 mm (9/16 in.), total length 320 mm (18 1/8 in.)	090267
	Lewis auger bit with hexagonal shank Ø 16 mm (5/8 in.), total length 320 mm (18 1/8 in.)	090268
	Lewis auger bit with hexagonal shank Ø 18 mm (11/16 in.), total length 320 mm (18 1/8 in.)	090269
	Lewis auger bit with hexagonal shank Ø 20 mm (13/16 in.), total length 320 mm (18 1/8 in.)	090270
	Lewis auger bit with hexagonal shank Ø 22 mm (7/8 in.), total length 320 mm (18 1/8 in.)	090271
	Lewis auger bit with hexagonal shank Ø 24 mm (15/16 in.), total length 320 mm (18 1/8 in.)	090272
	Lewis auger bit with hexagonal shank Ø 26 mm (1 in.), total length 320 mm (18 1/8 in.)	090273
	Lewis auger bit with hexagonal shank Ø 28 mm (1 1/8 in.), total length 320 mm (18 1/8 in.)	090274
	Lewis auger bit with hexagonal shank Ø 30 mm (1 3/16 in.), total length 320 mm (18 1/8 in.)	090275
	Case with auger bits 320 6 pieces Lewis auger bits Ø 8, 10, 12, 14, 16, 18 mm	093290
	Case with auger bits 460 6 pieces Lewis auger bits Ø 8, 10, 12, 14, 16, 18 mm	093291
	Case with auger bits 650 5 pieces Lewis auger bits Ø 12, 14, 16, 18, 20 mm	093292
	Drilling station BST 320 Drilling station BST 460 / BST 320	961210
	Drilling station BST 460 Drilling station BST 460 / BST 320	961211
	Drilling station BST 460 S Drilling station BST 650 S / BST 460 S	961215
	Drilling station BST 650 S Drilling station BST 650 S / BST 460 S	961216

Main picture
jpg, 1417 × 1417 Pixel,
410.7 kB

Images in use 1
jpg, 1417 × 1417 Pixel,
396.6 kB

Images in use 2
jpg, 1417 × 1417 Pixel,
359.8 kB

Images in use 3
jpg, 1417 × 1417 Pixel,
431.0 kB

Images in use 4
jpg, 1417 × 1417 Pixel,
502.1 kB

clip

Circular Saw > 105 mm

Cordless Impact Drill Driver ASB 18 M bl MidiMAX in the T-MAX - GB