Portable Band Saw

Jig Saw P1 cc MaxiMAX case in the T-MAX - GB 230 V

Jig Saw P1 cc

ref.no.: 917121

Transport and storage box T-MAX

PDF download Prospectus Operating instructions Product from dealer

Technical data

Delivery specification

Examples for usage

Applications

Advantages

Description

Accessories / Tools

Media centre

Nominal power input	1.2 hp
Universal motor	230 V / 50 Hz
No-load number of strokes	800-3000 1/min
Weight	5.5 lbs
Stroke height	1 Inch

3 jig saw blades CUnex W1, W2, W+P2
1 Parallel guide fence P1-PA	Ref. No. 205448
1 base plate P1-GP	Ref. No. 204350
1 hose connector P1-AS	Ref. No. 203917
1 chip deflector P1-SA	Ref. No. 204353
1 splinter guard P1-SS	Ref. No. 205447
1 glider P1-G	Ref. No. 205464
1 Mains cable 4 m (13.1 ft)

Innovative CUmax sawblade clamping ensures a positive fit because of a wedge pushing against the blade. This design reliably fastens the sawblade so that it cannot be displaced.

In order not to compromise the strength of the standard sole plate, a separate tilting plate was developed for the P1 cc.

The CUnex W1 consists of two separate, soldered sawblades. The blade‘s strength and wedge shape ensure precise and square sawing, even when cutting curves.

If exactly straight cuts are required, the P1 cc can be used in conjunction with the MAFELL F guide rail.

Straight cuts with guide rail and CUnex
Guided circle cutting with P1-PA parallel fence and CUnex
Recesses
Bevel cuts up to 45°
Compatible materials depend on sawblade; see special accessories/tools

The iF Product Design Award 2011 for the Jig Saw P1 cc.
To change the sawblade, simply release the locking lever. With just one hand, effortlessly remove the blade and insert the replacement.
The high-performance CUprex compact motor delivers consistently high speeds, even when executing long cuts.
The vacuum channel integrated in the sole plate guarantees outstanding dust extraction directly alongside the sawblade.

Owing to its ergonomic design, with low center of pressure and soft pads, the P1 cc is comfortable to hold in every situation.
Sophisticated self-extraction and a clever integrated blower keep the work surface free from chips, even if a dust extractor is not connected. The workplace therefore remains clean at all times.
The P1 cc offers continuously variable speeds in the range 800 to 3000 strokes/min., so that the output can be adjusted exactly to suit the material.
The sole plate, with integrated vacuum channel, is as sturdy as it looks. By way of a quick-release mechanism, it remains reliably fastened to the saw at an exact right angle.
Its intelligent accessories give the P1 cc unprecedented versatility. The innovative design of the new MAFELL precision sawblade CUnex W1, in particular, facilitates extremely precise sawing.

Image	Description	Ref. No.
	Jig saw blade CUnex W1 2 pieces	093676
	Jig saw blade W2 5 pieces	093701
	Jig saw blade W3 5 pieces	093702
	Jig saw blade W4 5 pieces	093703
	Jig saw blade W5 5 pieces	093704
	Jig saw blade W6 5 pieces	093706
	Jig saw blade W+P2 5 pieces	093705
	Jig saw blade W+M2 5 pieces	093707
	Jig saw blade L2 5 pieces	093708
	Jig saw blade M2 5 pieces	093709
	Jig saw blade E+F2 1 piece	093710
	Assortment 1 4 x W2, W+P2, W5, W4, 2 x CUnex W1	093712
	Assortment 2 4 x M2, W6, L2, W+M2, 2 x CUnex W1	093713
	Paralle guidel fence P1-PA incl. circular cutter	205448
	Tilting plate P1-SP tilting range +/- 45°	205446
	Splinter guard P1-SS 5 pieces	205447

Image	Description	Ref. No.
	Guide rail F 80 0,8 m (2,6 ft) long	204380
	Guide rail F 110 1.1 m (3.6 ft) long	204381
	Guide rail F 160 1.6 m (5.2 ft) long	204365
	Guide rail F 210 2,1 m (6,9 ft) long	204382
	Guide rail F 310 3,1 m (10,2 ft) long	204383
	Connecting piece F-VS for joining two guide rails	204363
	Angle fence F-WA	205357
	Guide pocket F 160 for guide rails up to 1,6 m	204626
	Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket	204805
	Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket	204749
	End cap F-EK 2 pieces	205400
	Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long	204376
	Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long	204375
	Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece	207770
	Flexible hose FXS-L up to 3,2 m (10.6 ft) long	205276