Portable Band Saw

MAFELL-ONLINE Sawing Portable Band Saw
undefined

Carpenter's Chain Saw ZSX TWIN Ec

Carpenter's Chain Saw ZSX TWIN Ec

ref.no.: 961601

  • Trolley included in delivery specification
230 V Suction Cuprex Guide system Lightweight Tilt angle 60° Powerful motor
PDF download Prospectus Operating instructions Product from dealer
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
Cutting depth 15 3/4 Inch
Cutting depth at 15° 15 3/16 Inch
Cutting depth at 30° 13 5/8 Inch
Cutting depth at 45° 11 1/8 Inch
Cutting depth at 60° 7 13/16 Inch
Tilts in both directions -15 - +60 °
Nominal No. of strokes – no load 3600 1/min
Nominal power input 2 x 4.0 hp
Weight 53,4 lbs
Universal motor 230 V / 50 Hz
1 Carbide-tipped ripping chain TWIN HM 400 Ref. No. 006977
1 Carbide-tipped fine sawing chain HM 400 Ref. No. 006972
1 Trolley ZSX-TWIN Ec
1 Glider for use with guide rail Ref. No. 205934
1 Parallel fence Ref. No. 204591
1 Combination screw driver 6 mm Ref. No. 093272
1 Open-end spanner 13 mm Ref. No. 093008
1 Mains cable 10 m (32.8 ft) Ref. No. 087906
undefined Perfect height adjustment. The Pertinax glider allows a compensating adjustment to be made for the thickness of the guide rail.
undefined Since a large volume of chips can be produced at cutting depths of up to 400 mm (15 3/4 in.), the ZSX-TWIN Ec can also be used in conjunction with an extraction system.
undefined In addition to the extensive special accessories that are already available for the ZSX 400 / HM, a specially developed carbide-tipped ripping chain delivers perfect results.
undefined Especially precise, guided cuts are easy to execute because the ZSX-TWIN Ec is compatible with the existing MAFELL guide rail system F.
  • Rip cuts and cross-cutting
  • Recesses
  • Compatible materials include solid wood and laminated beams
  • Despite tremendous nominal output of 6000 Watt, the single-phase ZSX-TWIN Ec weighs just 20 kg (44.1 lbs). The low weight-to-power ratio allows the saw to cut as deep as 400 mm (15 3/4 in.).
  • In timber construction and when fitting solid timber walls, corners frequently need to be cut out. Thanks to the vertical cutting edge, recesses and half-lap joints can be produced quickly and exactly. The arduous task of turning the work simply does not arise.
  • At the core of the MAFELL ZSX-TWIN Ec are the two 3000-Watt single-phase motors. They run at the same time on two 230 V phases of the three-phase electric power system.
  • The ZSX pivots from -15° to 60° exactly according to the scale.
  • The ZSX-TWIN Ec carpenter´s chain saw is a highly practical tool for large timbers.
  • By developing a machine with two motors, capable of producing very complex and otherwise laborious work easily and for a perfect fit, MAFELL has taken the chain saw to a new level.
  • With a nominal output of 3000 Watt, just one CUprex motor already tests the performance limits of the conventional 230 V power supply. Two CUprex motors running at the same time would bring a regular fused domestic power system to its knees. By dividing the load between two circuits, the twin-motor ZSX gets all the power it needs. A three-phase electric power system offers the ideal solution because the phases have separate fuses, so that the supply is not overloaded.
Image Description Ref. No.
undefined Guide rail F 80
0,8 m (2,6 ft) long 		204380
undefined Guide rail F 110
1.1 m (3.6 ft) long 		204381
undefined Guide rail F 160
1.6 m (5.2 ft) long 		204365
undefined Guide rail F 210
2,1 m (6,9 ft) long 		204382
undefined Guide rail F 310
3,1 m (10,2 ft) long 		204383
undefined Connecting piece F-VS
for joining two guide rails 		204363
undefined Angle fence F-WA 205357
undefined Guide pocket F 160
for guide rails up to 1,6 m 		204626
undefined Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket 		204805
undefined Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket 		204749
undefined End cap F-EK
2 pieces 		205400
undefined Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long 		204376
undefined Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long 		204375
undefined Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece 		207770
undefined Glider
For height adjustment when working with a guide rail 		206047
undefined Guide rail
length 3 m (9.8 ft) (2 pieces with connecting piece) 		037037
undefined Guide rail
length 3 m (9.8 ft) (one piece) 		200672
Image Description Ref. No.
undefined Guide rail extension
length 1,5 m (4.9 ft) 		036553
undefined Adapters (pair)
for parallel guide fence 		037195
undefined Carbide-tipped longitudinal-cut chain TWIN-HM 400 006977
undefined Carbide-tipped fine-cut saw chains HM 400
for ZSX Ec / 400 HM 		006972
undefined Carbide-tipped fine-cut saw chains HM 260
for ZSX Ec / 260 HM 		006968
undefined Replacement chain, left 091008
undefined Replacement chain, right 091009
undefined Saw chain 3/8"400 P
for rip cuts and cross-cutting 		006974
undefined Guide rail 260 HM for 006968
for 006968, 006972 		204581
undefined Guide rail 400 HM for 006972
for 006972 		204582
undefined Guide rail 400 3/8"
for 006974 		204583
undefined Riving knife 260 for 006968
for 006968 		204586
undefined Riving knife 400 for 006972, 006971, 006974
for 006974, 006972 		204587
undefined Sprocket HM for 006968
for 006968, 006972 		204584
undefined Sprocket 3/8" for 006971, 006974
for 006974 		204585
undefined Universal guide support 202069
undefined Main picture
jpg, 1417 × 1417 Pixel,
91.7 kB
undefined Images in use 1
jpg, 945 × 709 Pixel,
54.4 kB
undefined Images in use 2
jpg, 945 × 709 Pixel,
58.1 kB
undefined Images in use 3
jpg, 945 × 709 Pixel,
44.6 kB
undefined Images in use 4
jpg, 945 × 709 Pixel,
71.7 kB