Portable Circular Saw MS 55
ref.no.: 915721
Weight | 7.3 lbs |
Cutting depth | 3/8 - 2 3/16 Inch |
Cutting depth at 45° | 3/8 - 1 3/8 Inch |
Tilt range | 0 - 45 ° |
Nominal No. of strokes – no load | 4400 1/min |
Nominal power input | 1.5 hp |
Universal motor | 230 V / 50 Hz |
1 TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.), AT, 16 teeth | Ref. No. 092539 |
1 Allen key 5 mm | Ref. No. 093034 |
1 Guide bow | Ref. 203208 |
1 Mains cable 4 m - GB 230 V | Ref. No. 087802 |
Image | Description | Ref. No. |
---|---|---|
Guide rail F 80
0,8 m (2,6 ft) long |
204380 | |
Guide rail F 110
1.1 m (3.6 ft) long |
204381 | |
Guide rail F 160
1.6 m (5.2 ft) long |
204365 | |
Guide rail F 210
2,1 m (6,9 ft) long |
204382 | |
Guide rail F 310
3,1 m (10,2 ft) long |
204383 | |
Angle fence F-WA | 205357 | |
Suction clamping system Aeroxfix F-AF 1
with 1,3 m rail, adapters for above and underneath rail, flexible hose |
204770 | |
Connecting piece F-VS
for joining two guide rails |
204363 | |
Guide pocket F 160
for guide rails up to 1,6 m |
204626 | |
Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket |
204805 |
Image | Description | Ref. No. |
---|---|---|
Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket |
204749 | |
End cap F-EK
2 pieces |
205400 | |
Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long |
204376 | |
Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long |
204375 | |
Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece |
207770 | |
Parallel guide fence
with wing screws |
203214 | |
Mushroom-shaped handle
as additional machine guide, with fixing screw |
201451 | |
TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.), AT, 16 teeth, for rip cuts in wood |
092539 | |
TCT saw blade
160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood |
092552 | |
Flexible hose FXS-L
up to 3,2 m (10.6 ft) long |
205276 |