Portable Band Saw
Portable Circular Carpentry Saw MKS 165 Ec - US 120 V
Portable Circular Carpentry Saw MKS 165 Ec
ref.no.: 924522
- boxed
Technical data
Delivery specification
Examples for usage
Applications
Advantages
Description
Accessories / Tools
Media centre
| Cutting depth | 3 3/8 - 6 1/2 Inch |
| Cutting depth at 45° | 2 3/8 - 4 9/16 Inch |
| Cutting depth at 60° | 1 5/8 - 3 1/4 Inch |
| Tilt range | 0 - 60 ° |
| Nominal No. of strokes – no load | 1500 - 1800 1/min |
| Nominal power input | 3.4 hp |
| Weight | 33.7 lbs |
| Universal motor | 120 V |
| 1 Allen key 6 mm | Ref. No. 093081 |
| 1 Parallel guide fence | |
| 1 TCT saw blade 410 x 2.5/4.2 x 30 mm (16 1/8 in.), AT, 28 teeth (MKS 165 Ec) | Ref. No. 092525 |
Top results, as shown here with the MKS 165 Ec, can only be achieved with original MAFELL tools.
The cutting depth can be adjusted easily via a precise handwheel.
The tilt range of 0° – 60° enables extreme bevel cuts.
The constant cut display.
- Cross-cutting and rip cuts
- Bevel cuts up to 60°
- General joining work
- Compatible materials include solid wood, laminated beams, insulating materials
- Continuously variable speed control for individual requirements and applications.
- Lower saw guard with remote control - for easy release of the saw blade, e.g. when positioning at sharp angles.
- Constant cut display for 0° - 60° - due to exact centre of rotation, which is on the unterside of the base plate.
- With tool brake - for optimum operator safety and work processes.
- Carpenter´s portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys.
- Tilt through 60° makes the portable circular saws a universal partner.
- An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement.
- The saw´s handling and behavior are refined by smooth starting, constant speeds under load, speed reduction and overload protection.
- The easy-to-use stop system of the MKS and the adjustable hose connector make your work much easier.
| Image | Description | Ref. No. |
|---|---|---|
|
Guide rail F 80
0,8 m (2,6 ft) long |
204380 |
|
|
Guide rail F 110
1.1 m (3.6 ft) long |
204381 |
|
|
Guide rail F 160
1.6 m (5.2 ft) long |
204365 |
|
|
Guide rail F 210
2,1 m (6,9 ft) long |
204382 |
|
|
Guide rail F 310
3,1 m (10,2 ft) long |
204383 |
|
Angle fence F-WA | 205357 |
|
Connecting piece F-VS
for joining two guide rails |
204363 |
|
Guide pocket F 160
for guide rails up to 1,6 m |
204626 |
|
|
Guide pocket set
2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket |
204805 |
|
Guide rail
length 3 m (9.8 ft) (2 pieces with connecting piece) |
037037 |
|
|
Guide rail
length 3 m (9.8 ft) (one piece) |
200672 |
| Image | Description | Ref. No. |
|---|---|---|
|
|
Guide rail extension
length 1,5 m (4.9 ft) |
036553 |
|
Adapters (pair)
for parallel guide fence |
037195 |
|
TCT saw blade
410 x 2.5/4.2 x 30 mm (16 1/8 in.), AT, 28 teeth, for universal use (MKS 165 Ec) |
092525 |
|
TCT saw blade
410 x 2.5/4.2 x 30 mm (16 1/8 in.), AT, 20 teeth, for ripping cuts (MKS 165 Ec) |
092522 |
|
|
Guide pocket set
F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket |
204749 |
|
Flexible hose FXS-L
up to 3,2 m (10.6 ft) long |
205276 |
|
End cap F-EK
2 pieces |
205400 |
|
Non-slip profile F-HP 6,8 M
6.8 m (22.3 ft.) long |
204376 |
|
Splinter guard F-SS 3,4M
3.4 m (11.2 ft.) long |
204375 |
|
Lever clamp F-SZ 180MM
2 pieces, for fixing guide rail to workpiece |
207770 |
Main picture
jpg, 1417 × 1417 Pixel,
450.7 kB
Images in use 1
jpg, 1417 × 1417 Pixel,
303.0 kB
Images in use 2
jpg, 579 × 579 Pixel,
136.6 kB
Images in use 3
jpg, 579 × 579 Pixel,
81.9 kB
Images in use 4
jpg, 579 × 579 Pixel,
110.7 kB